Course 2022 H31-161 Test Prep Training Practice Exam Download [Q50-Q69]

admin H31-161 Huawei June 16, 2022

Rate this post

Course 2022 H31-161 Test Prep Training Practice Exam Download

H31-161 Exam Info and Free Practice Test Professional Quiz Study Materials

Huawei H31-161 Exam Syllabus Topics:

Topic	Details
Topic 1	Capability of independently maintaining typical network of carriers Maintain large-scale IP networks
Topic 2	High reliability technologies, QoS technologies Typical MAN and backbone networks of carriers
Topic 3	BRAS user access, IP MAN, IP backbone network, and mobile bearer network architecture MPLS TE features, multicast advanced features
Topic 4	MPLS VPN features, SR and EVPN features Network and technology evolution direction

NEW QUESTION 50
Which of the following statements about the VPLS packet forwarding are true?

If a PE receives broadcast packets from a local user, the PE forwards the packets to all other interfaces
In the same VSI and all other PEs.

If the destination MAC address of a packet is not a broadcast address and a PE has not learned the MAC
address, the broadcast this packet in one VSI

If the destination MAC address of a packets is not a broadcast address and a PE has not learned the
MAC address, the PE broadcast this packet in on VSI.

If a receive broadcast packet sent a remote PE, it forwards the packet only to the AC interface instead of
other PEs.

NEW QUESTION 51
The secure sockets layer (SSL) protocol mainly provides confidentiality and reliability between communication applications. It is found at the transport layer and the application layer, and provides encrypted data transmission. Which of the following protocols are required for encrypted data transmission?

Handshake protocol

Tunnel protocol

Record protocol

Alarm protocol

NEW QUESTION 52
An interface sends 300 Mbit/s user BE traffic. The downstream HQoS scheduling is configured at this interface as follows SQ: cir 15 Mbit/s pw 200 Mbit/s FQ. queue be Ipq shaping 10 CQ: port-queue be Ipq shaping shaping-percentage 10 outbound, port shaping 100 How much traffic is at the downstream outbound interface after HQoS scheduling?

20 Mbit/s

10 Mbit/s

200 Mbit/s

100 Mbit/s

NEW QUESTION 53
Refer to the exhibit.

Eth0 and Eth1 on PE 3 are bound to VRF1 and VRF2, respectively. A valid static route 1.1.1.1/32 is imported to BGP domains from CE 1, CE 2, and CE 4, respectively. Which of the following statements are false?

CE 3 can learn route 1.1.1.1/32 on CE 4.

CE 3 cannot learn route 1.1.1.1/32 on CE 1 because the RD of this route is the same as that of the VRF.

CE 3 cannot learn route 1.1.1.1/32 on CE 2 because the RD of this route is different from that of the VRF.

Local VRFs must use different RDs

NEW QUESTION 54
<Quidway>display current-configuration
multicast routing-enable
#
acl number 2000
rule 5 permit source 225.0.0.0 0.0.0.255
#
interface Ethernet6/1/0
ip address 10.1.1.1 255.255.255.0
igmp enable
pim sm
#
igmp
#
pim
ssm-policy 2000
#
return
The preceding are partial multicast router configurations. Which of the following configurations are required to configure the SSM Mapping on Ethernet 6/1/0 and map IGMPv2 Report messages for multicast group 225.0.0.1 to multicast source 2.2.2.2?

ssm-mapping 225.0.0.0 255.255.255.0 2.2.2.2

igmp on-demand

igmp prompt-leave

igmp ssm-mapping enable

NEW QUESTION 55
The Huawei router is the hop RD where the SSM mapping function is enabled at the interface. Some IGMPv2
hosts expect to receive (1.0.01,232.1.0.1) (1.0.0.1232.1.0.2), and (2.0.0,232.1.3.2) data. How can you satisfy
the preceding requirement with the least configurations?

ssm-mapping 232.1.3.2 16.2.0.0.1

ssm mapping 232.1.3.1.24.2.0.0.1

ssm-mapping 232. 1 308 2 00.1

ssm-mapping 232 1.0. 1 32. 1. 0. 0. 1

ssm-mapping 232. 1.0. 2. 32. 1. 0. 0. 1

ssm-mapping 232. 1. 0. 0. 24. 1. 0. 0. 1

NEW QUESTION 56
On a router, HQoS parameter are configured for the users. The CURP of user 1 is Mbit/s. The CUR and PIR of user 2 are 0 Mbit/s and 10 Mbit/s, respectively. The CIR and PR of user 3 are 0 Mbit and 20 Mbit/s respectively. These three users join group with a bandwidth of 10 Mbit/s.
Which statements is true?

User 2 is of higher priority than user 1

User 1 is of the highest priority among these users

User 3 is of higher priority than user 2

No user can preempt the bandwidth of the other two users

NEW QUESTION 57
Exhibit.

As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two
CEs. The following requirements needs to be met.
VPNA-CA 1 can interwork with VPNA-CE 2
2>VPNA-CE 1 can interwork with VPNA-CE 2.
The figure shows the types of links between CEs and PEs and the IDs used in Martini mode. Which the
following VC ID configurations are correct?

VCID1 =1, VCID2 = 2, VCID3 =3, VCID4 +4

VCID1 =2, VCID2 = 2, VCID3 =2, VCID4 +2

VCID1 =1, VCID2 = 2, VCID3 =1, VCID4 +2

VCID1 =1, VCID2 = 1, VCID3 =2, VCID4 +2

NEW QUESTION 58
On the OSPF network, which of the following statements about the authentication function of the OSPF protocol are true?

The OSPF protocol supports area authentication and interface authentication.

The interface authentication mode must be consistent with the area authentication mode . For Example, interface and area are authentication in simple or MDS mode or are not authenticated.

The interface authentication mode can be different from the area authentication mode.

The authentication function of the OSPF is implemented by parameter settings in hello packets.

NEW QUESTION 59
The RADIUS or Huawei Terminal Access Controller Access Control System (HWTACACS) protocol can be used for authentication during network access. Which of the following statements about these two protocols are false?

The HWTACACS uses TCP to transmit data while the RADIUS uses UDP to transmit data.

Both the HWTACACS and RADIUS encrypt all data in the packet body.

The RADIUS uses the Triple Data Encryption Standard (3Des) to encrypt passwords and some important data packets. The RADIUS provides a higher level of security than the HWTACACS.

The RADIUS implements authentication and authorization separately to improve security

NEW QUESTION 60
Refer to the exhibit.

As shown in the figure, a CE requires access to the Internet, and PE 1 is connected to the Internet gateway. Configurations on PE 1 are as follows:
PE 1:
#
nat address-group 0 175.31.1.3 175.31.1.10
#
ip vpn-instance vrf1route-distinguisher 192.168.1.1:100
vpn-target 100:1 export-extcommunity
vpn-target 100:1 import-extcommunity
#
acl number 2000
rule 5 permit vpn-instance vrf1
#
#
interface Serial0/0/1:0
link-protocol ppp
ip binding vpn-instance vrf1
ip address 150.1.1.1 255.255.0.0
nat outbound acl 2000 address-group 0
#
interface Pos2/1/0
clock master
link-protocol ppp
ip address 175.31.1.1 255.255.0.0
#
bgp 100
group ibgp internal
peer ibgp connect-interface LoopBack0peer 192.168.1.2 as-number 100
peer 192.168.1.2 group ibgp
#
ipv4-family unicast
undo synchronization
peer ibgp enable
peer 192.168.1.2 enable
peer 192.168.1.2 group ibgp
#
ipv4-family vpnv4
policy vpn-target
peer ibgp enable
peer 192.168.1.2 enable
peer 192.168.1.2 group ibgp
#
ipv4-family vpn-instance vrf1
default-route imported
import-route direct
import-route static
group nei_vrf1 external
peer nei_vrf1 as-number 65004
peer 150.1.1.2 as-number 65004peer 150.1.1.2 group nei_vrf1
#
ip route-static vpn-instance vrf1 0.0.0.0 0.0.0.0 175.31.1.2
PE 1 is connected to the Internet gateway through interface 175.31.1.2. CE 1 and CE 2 cannot ping this interface. Which of the following statements are true?

A default route must be configured on CE 1 and CE 2.

A private network route must be configured on the Internet gateway.

The public parameter of a static default route must be configured.

NAT translation must be configured on interface pos2/1/0 instead of interface s0/0/1:0.

NEW QUESTION 61
Which of the following statements describe the reliability requirements of the voice service for the IP bearer network?

Key modules of equipment must support active/standby switching or other redundancy backup functions.

The IP network uses a full/half-meshed structure and provides redundant links to strengthen the self-healing capability.

Link protection switching time = 50 ms

Link protection switching time can larger than 150 ms

NEW QUESTION 62
Exhibit.

Which of the following statements are false?

Ethernet 6/2/0 sends a PIM hello message every 100 seconds.

The TTL value is 60 in state-refresh messages sent by the router

If the PIM-DM is enabled at Ethernet 6/2/0 on a router, the PIM-SM cannot be enabled at other
interfaces on the router.

Ethernet 6/2/0 sends a state-refresh messages every 10 seconds

NEW QUESTION 63
In PIM-DM, which of the following scenarios about sending Join messages is true?

The leaf router in the idle state receives host Join messages.

The router receives prune messages of the RPF neighbor from other routers when it is receiving data from the upstream.

The intermediate router receives graft messages from the downstream router when all downstream interfaces of the intermediate router are in the prune state.

The router receives state-refresh messages.

NEW QUESTION 64
Which statement about the interworking between a VPN and the Internet is false?(D)

For a VPN and the Internet to interwork, the user device used to access the Internet must have a route to the desired address on the Internet and a backhaul route.

A VPN and the Internet can interwork through the PE, Internet gateway, or CE.

A VPN and the Internet can interwork through the CE or PE.

For a VPN and the Internet to interwork, network address translation (NAT) must be performed. NAT can be deployed on the interface of a PE used to connect to the Internet gateway, on the interface of a PE used to connect to a CE, or on the interface of a CE used to connect to a PE.

NEW QUESTION 65
Configure VRFs and relevant policies on a PE as follows:

If a route isimportedto the routing table of VRF 1, which VRF can the route match?

vrf4

vrf3

vrf2

NEW QUESTION 66
Which statement about the Hub s MPLS VPN networking is false?

The Hub PE can receive the VPN_IPv4 routes advertised by all Spoke PEs.

When an MP-IBGB neighbor relationship is established between two spoke PEs, the value of the Import VPN Target attribute of one Spoke PE can be the same as tat of the Export VPN Target attribute of the other Spoke PE.

The Hub PE advertises the routes learned from one Spoke PE to other Spoke PEs. Therefore, Spoke sites can access other through the Hub site.

All Spoke PEs can receive the VPN-IPv4 routes advertised by the Hub PE.

NEW QUESTION 67
Exhibit.

As shown in the figure, Super VLAN is enabled on SWA (a LAN switch). The Super VLAN configuration is
as follows:

Which of the following specifics the time order in which the preceding debugginginformationis generated?

3–4–1–2

1–2–3–4

1–4–2–3

3–2–1–4

NEW QUESTION 68
User A want to obtain a better network service for business development and signs an SLA with a corner. User A purchases a bandwidth of 5 Mbit/s to ensure the voice service (requiring short delay), vide service, key data services, and other services, If you were corner network administrator.
What would you do on the PE to ensure these services?

Mark the VoIP service as EF, set the CIR to 0Mbit/s, and set the PIR to 1 Mbit/s mark the video service as AF 4 and set the CIR and PIR to 2 Mbit/s mark key data services as AF3, set the CIR to 1 Mbit/s and the PIR to 5 Mbit/s: mark other services as AF1, set the CIR to 2 Mbit/s and Set PIR to 5 Mbit/s.

Mark the VoIP service as EF, set the CIR to 1 0Mbit/s, and set the PIR to 1 Mbit/s mark the video service as AF 4 and set the CIR and PIR to 2 Mbit/s mark key data services as AF3, set the CIR to 2 Mbit/s and the and the PIR to 5 Mbit/s : mark other services as BE, set the CIR to 0 Mbit/s and set PIR to 5 Mbit/s.

Mark the VoIP service as EF, set the CIR to 2 Mbit/s: marks the video service as AF 3 and set the CIR and PIR to 2 Mbit/s: mark key data services as AF4, set the CIR to 2 Mbit/s and the PIR to 5 Mbit/s mark other service as BE, set the CIR to 0 Mbit./s and set PIR to 5 Mbit/s

NEW QUESTION 69
Which statement about the configuration of route target (RT) and route distinguisher (RD) is true?

If routes need to exchange between two VPNs, the value of import RT of one VPN must be partially the same as Export RT of the other VPN.

RD and RT of a VPN instance cannot be the same as those of another VPN instance on the same PE.

If routers need to exchanged two VPNs, the value of import RT of one of the same as that of RT of the other VPN.

Two instances of a VPN share an RT.