Study HIGH Quality NSE5_FMG-7.0 Free Study Guides and Exams Tutorials [Q22-Q46] : Valid Premium Exam : http://premium.validexam.com

Q22. An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?

Device name and serial number of the original device.

Device name and serial number of the replacement device.

Device name of the replacement device and serial number of the original device.

Device name of the original device and serial number of the replacement device.

Q23. An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

Restore the configuration from a previous backup.

Log in as Super_User in order to unlock the ADOM.

Log in using the same administrator account to unlock the ADOM.

Delete the previous admin session manually through the FortiManager GUI or CLI.

Q24. An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

Q25. Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

Q26. An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced
firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

Q27. Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GUI.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

Q28. Which of the following statements are true regarding VPN Manager? (Choose three.)

VPN Manager must be enabled on a per ADOM basis.

VPN Manager automatically adds newly-registered devices to a VPN community.

VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.

Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.

VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.

Q29. Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

Q30. What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common
policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

Q31. Refer to the exhibit.

Which two statements are true if the script is executed using the Device Database option? (Choose two.)

You must install these changes using the Install Wizard to a managed device

The successful execution of a script on the Device Database will create a new revision history

The script history will show successful installation of the script on the remote FortiGate

The Device Settings Status will be tagged as Modified

Q32. An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running
configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

Q33. Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

The administrator logged in using the unsecure protocol HTTP, so the view is restricted.

The administrator profile does not have full access privileges like the Super_User profile.

The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.

FortiAnalyzer features are not enabled on FortiManager.

Q34. An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?

port2

virtual-wan-link

port1

auto-discovery

Q35. An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy
package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to
ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

Q36. View the following exhibit.

Which of the following statements are true based on this configuration setting? (Choose two.)

This setting will enable the ADOMs feature on FortiManager.

This setting is applied globally to all ADOMs.

This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.

This setting will allow automatic updates to the policy package configuration for a managed device.

Q37. View the following exhibit.

An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

10.0.1.0/24

It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values

192.168.0.1/24

Local-FortiGate will automatically choose an IP Network based on its network interface settings.

Q38. Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric license, group name and password are required for the FortiManager Security Fabric
integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

Q39. Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

Q40. Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

Backs up all devices and the FortiGuard database.

Does not back up firmware images saved on FortiManager

Supports FTP, SCP, and SFTP

Can be configured from the CLI and GUI

Q41. Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

Q42. View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

Q43. View the following exhibit.

An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies will be installed on FortiGate

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies in policy package will be deleted from the

Q44. Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

Q45. Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

It allows FortiGate to unset central management settings.

It allows FortiGate to reboot and recover the previous configuration from its configuration file.

It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.

It allows FortiGate to reboot and restore a previously working firmware image.

Q46. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

Study HIGH Quality NSE5_FMG-7.0 Free Study Guides and Exams Tutorials [Q22-Q46]

Fortinet NSE5_FMG-7.0 Exam Syllabus Topics: