Valid JN0-635 Test Answers & Juniper JN0-635 Exam PDF [Q100-Q124]

admin JN0-635 Juniper December 8, 2022

Rate this post

Valid JN0-635 Test Answers & Juniper JN0-635 Exam PDF

Juniper JN0-635 Certification Real 2022 Mock Exam

Overview of JN0-635 Exam Content

There are various subject areas that you need to be skilled at before you can take the final JN0-635 exam:

Security Compliance;
Tenant and Logical Systems;
NAT;
Threat Mitigation Techniques;
Concepts of Firewall Filters and ACLs;
Concepts of Layer 2 Security;
How Security Policy and Security Zone Troubleshooting works;
Application and Functions of Advanced IPsec.

Q100. You are asked to look at a configuration that is designed to take all traffic with a specific source ip address and forward the traffic to a traffic analysis server for further evaluation. The configuration is no longer working as intended.
Referring to the exhibit which change must be made to correct the configuration?

Apply the filter as in input filter on interface xe-0/2/1.0

Apply the filter as in input filter on interface xe-0/0/1.0

Create a routing instance named default

Apply the filter as in output filter on interface xe-0/1/0.0

Q101. You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q102. Click the Exhibit button.

Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)

Topology 3

Topology 5

Topology 2

Topology 4

Topology 1

Q103. Click the Exhibit button.

Branch 1 and Branch 2 have an active VPN tunnel configured, but internal hosts cannot communicate with each other.
Referring to the exhibit, which type of configuration should be applied to solve the problem?

Configure destination NAT on both Branch 1 and Branch 2

Configure source NAT on Branch 1

Configure destination NAT on Branch 2 only

Configure static NAT on both Branch 1 and Branch 2

Q104. Click the Exhibit button.

Referring to the exhibit, which statement is true?

ARP security is securing data across the control interface

IPsec is securing data across the control interface

SSH is securing data across the control interface

MACsec is securing data across the control interface

Q105. Click the Exhibit button.

Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?

Q106. You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?

An IPsec group VPN with the corporate firewall acting as the hub device.

Full mesh IPsec VPNs with tunnels between all sites.

A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.

A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.

Q107. Click the Exhibit button.

Referring to the exhibit, which statement is true?

Source NAT with PAT is occurring

Destination NAT is occurring

Static NAT without PAT is occurring

Source NAT without PAT is occurring

Q108. Click the Exhibit button.

Which statement is correct regarding the information show in the exhibit?

The tunnel binding was discovered automatically

The output is for an ADVPN

The tunnel gateway address was automatically discovered

The tunnel is not encrypting the traffic

Q109. Click the Exhibit button.

You have recently committed the IPS policy shown in the exhibit. When evaluating the expected behavior, you notice that you have a session that matches all the rules in your IPS policy.
In this scenario, which action would be taken?

drop packet

no-action

close-client-and-server

ignore-connection

Q110. What are three components of Software-Defined Secure Networks? (Choose three.)

ContrailB. Sky ATP

SRX Series device

Security Director

Network Director

Q111. The Software-Defined Secure Networks Policy Enforcer contains which two components?
(Choose two.)

SRX Series device

Sky ATP

Policy Controller

Feed Connector

Q112. You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?

Q113. Click the Exhibit button.

Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?

Q114. Click the Exhibit button.

Which statement explains the current state value of the command output shown in the exhibit?

A valid response was received from a domain PC probe, and the user is a valid domain user programmed in the PFE.

An invalid response was received from a domain PC probe, and the user is an invalid domain user.

A probe event generated an entry in the authentication table, but no probe response has been received from the domain PC.

The user-to-address mapping was successfully read from the domain controller event logs, and an entry was added to the authentication table witch currently resides on the Routing Engine.

Q115. Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

You can secure inter-VLAN traffic with a security policy on this device.

You can secure intra-VLAN traffic with a security policy on this device.

The device can pass Layer 2 and Layer 3 traffic at the same time.

The device cannot pass Layer 2 and Layer 3 traffic at the same time.

Q116. Click the Exhibit button.

A customer submits a service ticket complaining that access to http://www.example.com/ has been blocked.
Referring to the log message shown in the exhibit, why was access blocked?

All illegal source port was utilized.

The URI matched a profile entry.

The user/role permissions were exceeded.

There was a website category infraction.

Q117. Click the Exhibit button.

Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance.
However, you are unable to use IPsec power mode.
What is the problem?

IPsec power mode cannot be used with IPsec performance acceleration

IPsec power mode cannot be used with high IPsec maximum segment size values

IPsec power mode cannot be used with advanced services

IPsec power mode requires that you configure a policy-based VPN

Q118. Click the Exhibit button.

You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)

Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch

Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch

Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch

Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch

Q119. Click the Exhibit button.

You have enabled mixed mode on an SRX Series device.
You are unable to commit the configuration shown in the exhibit.
What is the problem in this scenario?

A Layer 3 interface has not been configured on VLAN v10.

The trust zone cannot contain both Layer 2 and Layer 3 interfaces.

STP is not enabled under the host-inbound-traffic system services hierarchy on the trust and protected security zones.

An IRB interface has not been configured.

Q120. You are scanning files that are being transferred from the Internet to hosts on your internal network with Sky ATP. However, you notice that files that are 1 GB in size are not being scanned by Sky ATP.
In this scenario, which two statements are true? (Choose two.)

The Sky ATP failback option is set to permit.

The Sky ATP engine or the SRX Series device is too busy.

The 1 GB file size is larger than the scan size limit for Sky ATP.

The Sky ATP policy on the SRX Series device is misconfigured.

Q121. Click the Exhibit button.

When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.
What is the cause of the error?

The fxp0 IP address is not routable

The SRX Series device certificate does not match the JATP certificate

The SRX Series device does not have an IP address assigned to the interface that accesses JATP

A firewall is blocking HTTPS on fxp0

Q122. Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

The application firewall rule is not inspecting encrypted traffic.

There are two rules configured in the rule set.

The rule set uses application definitions from the predefined library.

The configured rule set matches most analyzed applications.

Q123. Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

Events based on this third-party feed will not affect a host’s threat score

SRX Series devices will block traffic based on this third-party feed

SRX Series devices will not block traffic based on this third-party feed

Events based on this third-party feed will affect a host’s threat score

Q124. You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?

The collector must have a minimum of two interfaces.

The collector must have a minimum of three interfaces.

The collector must have a minimum of five interfaces.

The collector must have a minimum of four interfaces.

Exam JN0-635 must be taken to achieve the JNCIP-SEC certification, which is a professional Security designation offered by the renowned Juniper Networks. This vendor provides various security certificates at different levels such as associate (JNCIA-SEC), specialist (JNCIS-SEC), professional (JNCIP-SEC), and expert (JNCIE-SEC). For the professional level, the JNCIP-SEC certification is available, which targets networking specialists with substantial working experience and expertise in the Juniper Networks Junos OS for SRX Series gadgets. With this certificate, you can validate your security skills by utilizing advanced security technologies, the configuration of platforms, and troubleshooting techniques.

JN0-635 Exam Questions and Valid JN0-635 Dumps PDF: https://www.validexam.com/JN0-635-latest-dumps.html