Latest [Dec 20, 2022] Realistic Verified 300-430 Dumps [Q52-Q72] : Valid Premium Exam : http://premium.validexam.com

NEW QUESTION 52
An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?

Enable tracking parameters in Cisco MSE.

Enable Context Aware and CMX Browser Engage.

Install Cisco Prime Infrastructure with floor maps.

Set history parameters in Cisco MSE.

NEW QUESTION 53
Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?

Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.

Disable DHCP proxy on the Cisco WLC.

Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.

Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.

NEW QUESTION 54
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

FlexConnect ACL

VLAN name override

CCKM/OKC

AAA override

NEW QUESTION 55
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?

administrative access defined on the WLC and the network range 192 168 2 0/255 255 254.0

shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0

NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0

WLC roles for commands and the network range 192 168 1 0/255 255 255.0

NEW QUESTION 56
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

Policy Profile

AP Join Profile

Flex Profile

RF Profile

NEW QUESTION 57
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.

NEW QUESTION 58
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?

EAP-PEAP with 802.1x port authentication

EAP-TLS with 802.1x port authentication

EAP-FAST with CAPWAP DTLS + port authentication

EAP-FAST with CAPWAP DTLS

NEW QUESTION 59
Which statement about the VideoStream/Multicast Direct feature is true?

IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.

Each VideoStream client acknowledges receiving a video IP multicast stream.

It converts the unicast frame to a multicast frame over the air.

It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.

NEW QUESTION 60
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?

Allow UDP/16113portonthe central switch.

Allow TCP/16666 port on the router.

Allow TCP/16113 port on the firewall.

Allow UDP/16666 port on the VPN router.

NEW QUESTION 61
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

RF Profile

Flex Profile

Policy Profile

AP Join Profile

NEW QUESTION 62
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

10 seconds

15 seconds

30 seconds

60 seconds

NEW QUESTION 63
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

Policy Profile

AP Join Profile

Flex Profile

RF Profile

NEW QUESTION 64
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?

mark

rate-limit

WMM required

permit-ACL

NEW QUESTION 65
An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?

scheduled report

radio performance

software

client status

NEW QUESTION 66
An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?

Enable hyper location services for RFID.

Enable RFID tags in tracking options

Enable probing clients for active tags.

Define an RFID group globally and add the tags.

NEW QUESTION 67
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)

CSV

PDF

XLS

DOC

plain text

NEW QUESTION 68
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?

Use the user password that is configured on the server.

Disable the server certificate to be validated on the client.

Update the client certificate to match the user account.

Replace the client certificates from the CA with the server certificate.

NEW QUESTION 69
An engineer wants to upgrade the APs in a Cisco FlexConnect group. To
accomplish this upgrade, the FlexConnect AP Upgrade setting will be used One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller. Which action accomplishes this direct upgrade?

Do not set any master APs. 9 0

Allocate the master APs to different groups

Reboot all APs before the upgrade.

Remove the APs from the group

NEW QUESTION 70
A customer is deploying local web authentication. Which software application must be implemented on Cisco ISE to utilize as a directory service?

Solaris Directory Service

LDAP

SAML

Novell eDirectory

NEW QUESTION 71
What is the difference between PIM sparse mode and PIM dense mode?

Sparse mode supports only one switch. Dense mode supports multiswitch networks.

Sparse mode floods. Dense mode uses distribution trees.

Sparse mode uses distribution trees. Dense mode floods.

Sparse mode supports multiswitch networks. Dense mode supports only one switch.

NEW QUESTION 72
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)

mDNS uses only UDP port 5436 as a destination port.

mDNS cannot use UDP port 5353 as the destination port.

mDNS is not supported on FlexConnect APs with a locally switched WLAN.

Controller software must be newer than 7.0.6+.

mDNS is not supported over IPv6.