This page was exported from Valid Premium Exam [ http://premium.validexam.com ] Export date:Mon Feb 24 9:06:25 2025 / +0000 GMT ___________________________________________________ Title: Latest [Dec 20, 2022] Realistic Verified 300-430 Dumps [Q52-Q72] --------------------------------------------------- Latest [Dec 20, 2022] Realistic Verified 300-430 Dumps Pass Cisco 300-430 Exam Updated 218 Questions NEW QUESTION 52An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?  Enable tracking parameters in Cisco MSE.  Enable Context Aware and CMX Browser Engage.  Install Cisco Prime Infrastructure with floor maps.  Set history parameters in Cisco MSE. NEW QUESTION 53Refer to the exhibit.A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?  Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.  Disable DHCP proxy on the Cisco WLC.  Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.  Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers. NEW QUESTION 54Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?  FlexConnect ACL  VLAN name override  CCKM/OKC  AAA override NEW QUESTION 55An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?  administrative access defined on the WLC and the network range 192 168 2 0/255 255 254.0  shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0  NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0  WLC roles for commands and the network range 192 168 1 0/255 255 255.0 NEW QUESTION 56Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?  Policy Profile  AP Join Profile  Flex Profile  RF Profile https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocation.htmlNEW QUESTION 57The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used. ExplanationDiagram Description automatically generatedNEW QUESTION 58What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?  EAP-PEAP with 802.1x port authentication  EAP-TLS with 802.1x port authentication  EAP-FAST with CAPWAP DTLS + port authentication  EAP-FAST with CAPWAP DTLS ExplanationNEW QUESTION 59Which statement about the VideoStream/Multicast Direct feature is true?  IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.  Each VideoStream client acknowledges receiving a video IP multicast stream.  It converts the unicast frame to a multicast frame over the air.  It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet. NEW QUESTION 60A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?  Allow UDP/16113portonthe central switch.  Allow TCP/16666 port on the router.  Allow TCP/16113 port on the firewall.  Allow UDP/16666 port on the VPN router. Explanationhttps://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.htmlNEW QUESTION 61Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?  RF Profile  Flex Profile  Policy Profile  AP Join Profile NEW QUESTION 62What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?  10 seconds  15 seconds  30 seconds  60 seconds NEW QUESTION 63Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?  Policy Profile  AP Join Profile  Flex Profile  RF Profile Explanationhttps://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocatioNEW QUESTION 64An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?  mark  rate-limit  WMM required  permit-ACL https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/AVC_8point8_dg.htmlNEW QUESTION 65An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?  scheduled report  radio performance  software  client status ExplanationText Description automatically generatedNEW QUESTION 66An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?  Enable hyper location services for RFID.  Enable RFID tags in tracking options  Enable probing clients for active tags.  Define an RFID group globally and add the tags. NEW QUESTION 67The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)  CSV  PDF  XLS  DOC  plain text NEW QUESTION 68An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?  Use the user password that is configured on the server.  Disable the server certificate to be validated on the client.  Update the client certificate to match the user account.  Replace the client certificates from the CA with the server certificate. NEW QUESTION 69An engineer wants to upgrade the APs in a Cisco FlexConnect group. Toaccomplish this upgrade, the FlexConnect AP Upgrade setting will be used One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller. Which action accomplishes this direct upgrade?  Do not set any master APs. 9 0  Allocate the master APs to different groups  Reboot all APs before the upgrade.  Remove the APs from the group NEW QUESTION 70A customer is deploying local web authentication. Which software application must be implemented on Cisco ISE to utilize as a directory service?  Solaris Directory Service  LDAP  SAML  Novell eDirectory NEW QUESTION 71What is the difference between PIM sparse mode and PIM dense mode?  Sparse mode supports only one switch. Dense mode supports multiswitch networks.  Sparse mode floods. Dense mode uses distribution trees.  Sparse mode uses distribution trees. Dense mode floods.  Sparse mode supports multiswitch networks. Dense mode supports only one switch. Explanationhttps://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te In Sparse mode packets branches distribution growth as new nodes join the multicast group.https://community.calix.com/s/article/Dense-Mode-Multicast-vs-Sparse-Mode-Multicast-1NEW QUESTION 72Which two restrictions are in place with regards to configuring mDNS? (Choose two.)  mDNS uses only UDP port 5436 as a destination port.  mDNS cannot use UDP port 5353 as the destination port.  mDNS is not supported on FlexConnect APs with a locally switched WLAN.  Controller software must be newer than 7.0.6+.  mDNS is not supported over IPv6.  Loading … Get 2022 Updated Free Cisco 300-430 Exam Questions and Answer: https://www.validexam.com/300-430-latest-dumps.html --------------------------------------------------- Images: https://premium.validexam.com/wp-content/plugins/watu/loading.gif https://premium.validexam.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-12-20 11:05:11 Post date GMT: 2022-12-20 11:05:11 Post modified date: 2022-12-20 11:05:11 Post modified date GMT: 2022-12-20 11:05:11