UPDATED [Jan 15, 2023] Pass HCIE-Datacom V1.0 Exam with Latest Questions [Q248-Q265]

admin H12-891_V1.0 Huawei January 15, 2023

Rate this post

UPDATED [Jan 15, 2023] Pass HCIE-Datacom V1.0 Exam with Latest Questions

H12-891_V1.0 Exam Practice Questions prepared by Huawei Professionals

QUESTION 248
When configuring AS-Path-Filter, ip as-path-filter 10 permit_100$ indicates a matching route received from the A5100 but not from the AS100

TRUE

FALSE

QUESTION 249
Protocols with TCP ports 443, 179, 137, 110, and 23 are, in order: radio

Finger,DHCP Server,NetBios Name Server,POP3,TelnetB

LDAP,SNMP,TFTP,POP3,Telnet

HTTPS,SNMP,POP3,DNS ,Telnet

HiPS,BGP, NetBios Name Server ,POP3,TelnetE. BGP,POP3,SNMP,TFTP,Teinet

QUESTION 250
What information does the BGP Open message carry as follows?

BGP Router ID

Route attributes

Local Autonomous System (AS) number

Hold time

QUESTION 251
When judging the old and new LSA, the serial number parameter and the age parameter are used , and the following two parameters are correct for ?( Multiple choice questions).

When the router receives two LSAs, where the sequence number is the same and the checksum is the same, the smaller the age, the better

When the router receives-The age of the LSA is set to 3600S, the LSA is unavailable

If the serial number of the LSA reaches the end value of Ox7FFFFFFF, the current router advertises an LSA with an age of 3600S

Both the serial number and age parameters can determine whether the LSA is old or new, and the router prioritizes the sequence to participate in the teaching, and the larger the better

QUESTION 252
The following statement about the OSPFv3 message format is correct?( Multiple select).

There is no change in the option field of the Hello message

Remove the Authentication, Auth Type fields

Hello messages no longer contain address information, carrying Interface lD

The OSPF version number changed from 2 to 3

QUESTION 253
Regarding BGP4+, the following statement is correct?

BGP4+ carries the next hop address of the route through the Network Address of Next Hop in the NLRI properties MP_REACH

BGP4+ carries the next hop address of the IPv6 route through the NEXT_HOP attribute

The NEXT_HOP attribute does not exist in BGP4+

BGP4+ carries the prefix and mask length of the IPv6 route through the NLRI attribute

QUESTION 254
Regarding BGP MED, which of the following descriptions is correct?

In the BGP routing rules, MED has a lower priority than AS Path, Praferred-value, Local-Preference, etc Origin

The default value for the BGP routing MED is 0

By default, if there is no MED value in the route attribute, it is processed by 0 If the bestroute med-none-as-maximum command is configured, MED is processed as the maximum 4294967295

By default, BGP routing rules can MED comparison of routes from different autonomous systems

QUESTION 255
In EPIM-SM, the following description of the PIM Join message is correct?

PIM Join messages are sent every 3 minutes, and status

PIM Join messages for the multicast tree are only sent when the multicast tree is first established

The PIM Join message is sent every 60 seconds to refresh the status of the upstream router mroute for the multicast tree

The upstream router sends a PIM Join acknowledgment in response to each PIM Join message received from the downstream router

QUESTION 256
IS-IS supports the processing and computation of IPv6 routes by adding ATLPs to carry IPv6 addresses and reachability information.

TRUE

FALSE

QUESTION 257
As shown in the figure,

RI, R2 establishes an EBGP neighbor and turns on the BFD detection function, the following statement is correct

Detection time for BFD packets for AR2 800ms

R1 Detection time for BFD packets for 1280ms

R1 Detection time for BFD packets The detection time for BFD packets for 660ms

R2 is 600ms

QUESTION 258
About multi-instance CE (Multi-VPN-Instance CE, MCE). What is the error described below?

Users who connect to the same MCE but are not part of a VPN instance cannot access each other

The MCE vs. PE direction must have multiple physical links to achieve isolation between different VPN instances

MCE-enabled devices can access multiple VPI instances in BGP/RPLS IPVPN applications, reducing user network equipment investment

On the MCE device, you need to create their own routing tables for different VPNs and bind to the corresponding interface

QUESTION 259
If you have a Huawei switch running the STP protocol, and now connect the GO/O/17 interface and the GO/O/18 interface of the switch through a cable, then the scenario described below is correct ?( Single choice questions).

Both the G0/0/17 interface and the GO/0/18 interface enter the Forwarding state

Both the Go/0/17 interface and the G0/0/18 interface enter the Disccarding state

The Go/0/17 interface enters the Blocking state

The GO/0/18 interface will continuously change back and forth between the Listening state and the Learning state

GO/0/18 interface will enter the Disking state

QUESTION 260
Regarding IPv6 over IP4(19) road, the following statement is correct

The 6to4 automatic tunnel requires the use of a specific IP6 address segment, and the assigned address segment is preceded by 3ffe::/16

When configuring manual tunneling on the VRP platform, a Tunnel interface is generally created; When configuring automatic tunneling, a Vrua-Template interface is usually created

The ISATAP tunnel determines the destination IPV4 address of the tunnel based on the destination IP6 address.

All automatic tunnels encapsulate data in the same way.

Automatic tunneling has great advantages over manual tunneling, and manual tunneling will be phased out

QUESTION 261
If all the public IP addresses are used by a company’s intranet users to access the Internet using NAT’s No-pat method, what will happen to subsequent intranet users who access the Internet?

automatically switch NAT to PAT after the Internet

Subsequent intranet users will not be able to access the Internet

Synchronize messages to other NAT conversion devices for NAT conversion

Squeeze out the previous user and force NAT conversion to go online

QUESTION 262
The following statement about is the ISIS protocol LSP message is correct

LSP fast diffusion feature, first diffuse less than the specified number of LSPs, to speed up the synchronization process of LSDB

By configuring an LSP-generated smart timer, the timer automatically adjusts the delay time based on the frequency of changes in routing information

When the link status information increases, the message length of the LSP can be increased so that each LSP can carry more information.

Reducing the minimum time interval for sending LSPs per port can speed up the diffusion of LSPs.

QUESTION 263
In the IS-IS broadcast network type, when establishing an adjacency relationship, if the router interface priority is set to 0, it will not participate in the dis election

True

False

QUESTION 264
Run the SSM across the entire HW IP multicast network. The following about SSM understands correctly?( Multiple choice question)

No RP is required

SSM uses only shared trees

SSM uses only the SPT tree

Ideal for 1-to-many applications

SSM is recommended when you have multiple sources and expect to minimize the state of mroute in your network Ideal for many-to-many applications

QUESTION 265
In broadcast networks, elections to DIS begin only after a neighbor relationship has been established

True

False

Loading …