This page was exported from Valid Premium Exam [ http://premium.validexam.com ] Export date:Mon Feb 24 16:04:21 2025 / +0000 GMT ___________________________________________________ Title: Free 300-410 Exam Files Downloaded Instantly 100% Dumps & Practice Exam [Q225-Q246] --------------------------------------------------- Free 300-410 Exam Files Downloaded Instantly 100% Dumps & Practice Exam Free Exam Updates 300-410 dumps with test Engine Practice What's Next After Cisco ENARSI? Once you have passed the Cisco ENARSI 300-410 exam, assuming you have already passed the core 350-401 ENCOR test, and have been awarded the prestigious CCNP Enterprise certification, you get new prospects for professional improvement. Earning this certificate automatically earns you the right to boast about it on social media platforms such as LinkedIn to attract more and more job offers with high paying salaries. CCNP Enterprise is valid for a total of 3 years, after which recertification should be done by keeping up with educational activities offered by Cisco or completing exams. Finally, one can also opt for expert-level certifications such as CCIE Enterprise Infrastructure or CCIE Enterprise Wireless. Each of them requires applicants to only pass one extra lab exam.   NEW QUESTION 225Refer to the exhibit. During troubleshooting it was discovered that the device is not reachable using a secure web browser.What is needed to fix the problem?  permit tcp port 443  permit udp port 465  permit tcp port 465  permit tcp port 22 Section: Infrastructure SecurityNEW QUESTION 226Drag and drop the DHCP messages from the left onto the correct uses on the right. ExplanationDHCPACKThe server-to-client communication with configuration parameters, including committed network address.DHCPINFORMThe client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address.DHCPNAKThe server-to-client communication, refusing the request for configuration parameter.DHCPDECLINEThe client-to-server communication, indicating that the network address is already in use Reference:https://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation-resolution/27470-100.html DHCPINFORM: If a client has obtained a network address through some other means or has a manually configured IP address, a client workstation may use a DHCPINFORM request message to obtain other local configuration parameters, such as the domain name and Domain Name Servers (DNSs). DHCP servers receiving a DHCPINFORM message construct a DHCPACK message with any local configuration parameters appropriate for the client without allocating a new IP address. This DHCPACK will be sent unicast to the client.DHCPNAK: If the selected server is unable to satisfy the DHCPREQUEST message, the DHCP server will respond with a DHCPNAK message. When the client receives a DHCPNAK message, or does not receive a response to a DHCPREQUEST message, the client restarts the configuration process by going into the Requesting state. The client will retransmit the DHCPREQUEST at least four times within 60 seconds before restarting the Initializing state.DHCPACK: After the DHCP server receives the DHCPREQUEST, it acknowledges the request with a DHCPACK message, thus completing the initialization process.DHCPDECLINE: The client receives the DHCPACK and will optionally perform a final check on the parameters. The client performs this procedure by sending Address Resolution Protocol (ARP) requests for the IP address provided in the DHCPACK. If the client detects that the address is already in use by receiving a reply to the ARP request, the client will send a DHCPDECLINE message to the server and restart the configuration process by going into the Requesting state.Reference:https://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation-resolution/27470-100.htmlNEW QUESTION 227R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?  R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.  R1 does not accept any routes other than 192.168.130.0/24  R1 does not forward traffic that is destined for 192.168.30.0/24  Network 192.168.130.0/24 is not allowed in the R1 table NEW QUESTION 228Drag and Drop QuestionDrag and drop the SNMP attributes in Cisco IOS devices from the onto he correct SNMPv2c or SNMPv3 categories on the right. NEW QUESTION 229Which mechanism must be chosen to optimize the reconvergence time for OSPF at company location407173257 that is less CPU-intensive than reducing the hello and dead timers?  BFD  Dead Peer Detection keepalives  SSO  OSPF demand circuit NEW QUESTION 230Drag and drop the LDP features from the left onto the descriptions on the right ExplanationDiagram Description automatically generatedThe MPLS LDP Inbound Label Binding Filtering feature can be used to control the amount of memory used to store Label Distribution Protocol (LDP) label bindings advertised by other devices. For example, in a simple Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) environment, the VPN provider edge (PE) devices might require label switched paths (LSPs) only to their peer PE devices (that is, they do not need LSPs to core devices). Inbound label binding filtering enables a PE device to accept labels only from other PE devices.NEW QUESTION 231Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right. ExplanationGraphical user interface, application Description automatically generatedNEW QUESTION 232Refer to the exhibit.The administrator can see the traps for the failed login attempts, but cannot see the traps of successful login attempts. What command is needed to resolve the issue?  Configure logging history 2  Configure logging history 3  Configure logging history 4  Configure logging history 5 ExplanationBy default, the maximum severity sent as a syslog trap is warning. That is why you see syslog traps for login failures. Since a login success is severity 5 (notifications), those syslog messages will not be converted to traps. To fix this, configure:Note:The syntax of login block is:login block-for seconds attempts tries within secondsNEW QUESTION 233Refer to the exhibit.AS111 is receiving its own routes from AS200 causing a loop in the network. Which configuration provides loop prevention?A)B)C)D)  Option A  Option B  Option C  Option D NEW QUESTION 234An engineer sets up a DMVPN connection to connect branch 1 and branch 2 to HQ branch 1 and branch 2 cannot communicate with each other. Which change must be made to resolve this issue?  Option A  Option B  Option C  Option D ExplanationR1(config)#int tunnel 1R1(config-if) no ip split-horizon eigrp 100NEW QUESTION 235Refer to the exhibit The engineer configured route redistribution in the network but soon received reports that R2 cannot access 192 168 7 0/24 and 192 168 15 0/24 subnets Which configuration resolves the issue?  Option A  Option B  Option C  Option D NEW QUESTION 236Refer to the exhibit A company builds WAN infrastructure between the head office and POPs using DMVPN hub-and-spoke topology to provide end-to-end communication All POPs must maintain point-to-point connectivity with the head office Which configuration meets the requirement at routers R12 and R13?  Option A  Option B  Option C  Option D NEW QUESTION 237Refer to the exhibit.After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?  Set the administrative distance 100 under the RIP process on R2.  Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.  Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.  Redistribute the directly connected interfaces on R2. NEW QUESTION 238Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right. NEW QUESTION 239Refer to the exhibit.Refer to the exhibit. The OSPF neighbor relationship is not coming up What must be configured to restore OSPF neighbor adjacency?  OSPF on the remote router  matching hello timers  use router ID  matching MTU values NEW QUESTION 240Refer to the exhibit.The ACL is placed on the inbound Gigabit 0/1 interface of the router. Host192.168.10.10cannot SSH to host 192.168.100.10 even though the flow is permitted. Which action resolves the issue without opening full access to this router?  Move the SSH entry to the beginning of the ACL  Temporarily move the permit ip any any line to the beginning of the ACL to see if the flow works  Temporarily remove the ACL from the interface to see if the flow works  Run the show access-list FILTER command to view if the SSH entry has any hit statistic associated with it NEW QUESTION 241Refer to the exhibit.An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reason for this error?  An authentication error with the NTP server results in an incorrect timestamp.  The keyword localtime is not defined on the timestamp service command.  The NTP server is in a different time zone.  The system clock is set incorrectly to summer-time hours. NEW QUESTION 242An engineer is troubleshooting on the console session of a router and turns on multiple debug commands. The console screen is filled with scrolling debug messages that none of the commands can be verified if entered correctly or display any output. Which action allows the engineer to see entered console commands while still continuing the analysis of the debug messages?  Configure the logging synchronous command  Configure the no logging console debugging command globally  Configure the logging synchronous level all command  Configure the term no mon command globally Let’s see how the “logging synchronous” command affect the typing command:Without this command, a message may pop up and you may not know what you typed if that message is too long. When trying to erase (backspace) your command, you realize you are erasing the message instead.With this command enabled, when a message pops up you will be put to a new line with your typing command which is veryNEW QUESTION 243While troubleshooting connectivity issues to a router, these details are noticed:* Standard pings to all router interfaces, including loopbacks, are successful.* Data traffic is unaffected.* SNMP connectivity is intermittent.* SSH is either or disconnects frequently.Which command must be configured first to troubleshoot this issue?  Show policy-map control-plane  Show policy-map  Show interface inc drop  Show ip route NEW QUESTION 244Which two statements about redistributing EIGRP into OSPF are true? (Choose two)  The redistributed EIGRP routes appear as type 3 LSAs in the OSPF database  The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database  The administrative distance of the redistributed routes is 170  The redistributed EIGRP routes appear as OSPF external type 1  The redistributed EIGRP routes as placed into an OSPF area whose area ID matches the EIGRP autonomous system number  The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table NEW QUESTION 245Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right. Reference:https://www.rogerperkin.co.uk/featured/route-distinguisher-vs-route-target/NEW QUESTION 246Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?  router ospfv3 1address-family ipv4  Router(config-router)#ospfv3 1 ipv4 area 0  Router(config-if)#ospfv3 1 ipv4 area 0  router ospfv3 1address-family ipv4 unicast Reference:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ip6-route-ospfv3-add-fam-xe.html Loading … Provide Valid Dumps To Help You Prepare For Implementing Cisco Enterprise Advanced Routing and Services Exam: https://www.validexam.com/300-410-latest-dumps.html --------------------------------------------------- Images: https://premium.validexam.com/wp-content/plugins/watu/loading.gif https://premium.validexam.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-12-03 11:39:26 Post date GMT: 2023-12-03 11:39:26 Post modified date: 2023-12-03 11:39:26 Post modified date GMT: 2023-12-03 11:39:26