This page was exported from Valid Premium Exam [ http://premium.validexam.com ] Export date:Mon Feb 24 15:18:49 2025 / +0000 GMT ___________________________________________________ Title: [Q26-Q42] Excellent NSE5_FMG-7.0 PDF Dumps With 100% ValidExam Exam Passing Guaranted [Jan-2024] --------------------------------------------------- Excellent NSE5_FMG-7.0 PDF Dumps With 100% ValidExam Exam Passing Guaranted [Jan-2024] 100% Pass Your NSE5_FMG-7.0 Fortinet NSE 5 - FortiManager 7.0 at First Attempt with ValidExam Fortinet NSE5_FMG-7.0 exam is divided into multiple sections, and each section is designed to test the skills and knowledge of candidates in a specific area. NSE5_FMG-7.0 exam includes topics such as FortiManager installation and configuration, device management, policy management, and system management. Candidates are required to demonstrate their knowledge and skills in each of these areas to pass the exam and become certified as Fortinet NSE 5 - FortiManager 7.0.   NEW QUESTION 26Refer to the exhibit.Which two statements about the output are true? (Choose two.)  The latest revision history for the managed FortiGate does match with the FortiGate running configuration  Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed  The latest history for the managed FortiGate does not match with the device-level database  Configuration changes directly made on the FortiGate have been automatically updated to device-level databaseExplanation:STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up – dev-db: modified – This is the device setting status which indicates that configuration changes were made on FortiManager. – conf: in sync – This is the sync status which shows that the latest revision history is in sync with Fortigate’s configuration. – cond: pending – This is the configuration status which says that configuration changes need to be installed.Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn’t installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn’t match device DB.Conclusion: – Revision DB does match FortiGate. – No changes were installed to FortiGate yet. – Device DB doesn’t match Revision DB. – No changes were done on FortiGate (auto-update) but configuration was retrieved insteadAfter an Auto-Update or Retrieve: device database = latest revision = FGTThen after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).After reverting to a previous revision in revision history: device database = reverted revision != FGTNEW QUESTION 27Refer to the exhibits.Exhibit one.Exhibit two.An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What can be the main reason for these unset commands?  The DNS addresses in the default system settings are the same as the Training system template  The Training system template has other default settings  The ADOM is locked by another administrator  The Training system template does not have assigned devices NEW QUESTION 28View the following exhibit.Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?  The Install On column value represents successful installation on the managed devices  Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets  Policy seq#3 will be installed on the Trainer[NAT] VDOM only  Policy seq#3 will be not installed on any managed device NEW QUESTION 29Refer to the exhibit.Which statement about the object named ALL is true?  FortiManager updated the object ALL using the FortiGate value in its database.  FortiManager installed the object ALL with the updated value.  FortiManager created the object ALL as a unique entity in its database, which can be only used by thismanaged FortiGate.  FortiManager updated the object ALL using the FortiManager value in its database. NEW QUESTION 30An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.In which database will the configuration be saved?  Device-level database  Revision history database  ADOM-level database  Configuration-level database https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942NEW QUESTION 31Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)  Managed gateways are devices managed by FortiManager in the same ADOM  External gateways are third-party VPN gateway devices only  Protected subnets are the subnets behind the device that you don’t want to allow access to over the IPsec VPN  Managed devices in other ADOMs must be treated as external gateways NEW QUESTION 32In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?  Secondary device with highest priority will automatically be promoted to the primary role, and manuallyreconfigure all other secondary devices to point to the new primary device  Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.  Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.  FortiManager HA state transition is transparent to administrators and does not require any reconfiguration. FortiManager_6.4_Study_Guide-Online – page 346FortiManager HA doesn’t support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:1. Manually reconfigure one of the secondary devices to become the primary device2. Reconfigure all other secondary devices to point to the new primary deviceNEW QUESTION 33View the following exhibit.Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?  The Install On column value represents successful installation on the managed devices  Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets  Policy seq#3 will be installed on the Trainer[NAT] VDOM only  Policy seq#3 will be not installed on any managed device NEW QUESTION 34An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to themanaged FortiGate.In which database will the configuration be saved?  Device-level database  Revision history database  ADOM-level database  Configuration-level database https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942NEW QUESTION 35View the following exhibit.If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)  FortiGate is discovered by FortiManager through the FortiGate NATed IP address.  FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.  During discovery, the FortiManager NATed IP address is not set by default on FortiGate.  If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.NEW QUESTION 36View the following exhibit.Which one of the following statements is true regarding the object named ALL?  FortiManager updated the object ALL using FortiGate’s value in its database  FortiManager updated the object ALL using FortiManager’s value in its database  FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.  FortiManager installed the object ALL with the updated value. NEW QUESTION 37Which of the following statements are true regarding VPN Manager? (Choose three.)  VPN Manager must be enabled on a per ADOM basis.  VPN Manager automatically adds newly-registered devices to a VPN community.  VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.  Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.  VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec. NEW QUESTION 38An administrator wants to delete an address object that is currently referenced in a firewall policy.What can the administrator expect to happen?  FortiManager will not allow the administrator to delete a referenced address object  FortiManager will disable the status of the referenced firewall policy  FortiManager will replace the deleted address object with the none address object in the referenced firewall policy  FortiManager will replace the deleted address object with all address object in the referenced firewall policy NEW QUESTION 39You are moving managed FortiGate devices from one ADOM to a new ADOM.Which statement correctly describes the expected result?  Any pending device settings will be installed automatically  Any unused objects from a previous ADOM are moved to the new ADOM automatically  The shared policy package will not be moved to the new ADOM  Policy packages will be imported into the new ADOM automaticallyD NEW QUESTION 40View the following exhibit:An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?  port1 on FortiGate and WAN on FortiManager  port1 on both FortiGate and FortiManager  WAN zone on FortiGate and WAN zone on FortiManager  WAN zone on FortiGate and WAN interface on FortiManager NEW QUESTION 41An administrator would like to authorize a newly-installed AP using AP Manager. What steps does the administrator need to perform to authorize an AP?  Authorize the new AP using AP Manager and wait until the change is updated on the FortiAP. Changes to the AP’s state do not require installation.  Changes to the AP’s state must be performed directly on the managed FortiGate.  Authorize the new AP using AP Manager and install the policy package changes on the managed FortiGate.  Authorize the new AP using AP Manager and install the device level settings on the managed FortiGate. NEW QUESTION 42An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.How can the administrator unlock the ADOM?  Restore the configuration from a previous backup.  Log in as Super_User in order to unlock the ADOM.  Log in using the same administrator account to unlock the ADOM.  Delete the previous admin session manually through the FortiManager GUI or CLI.  Loading … Trend for NSE5_FMG-7.0 pdf dumps before actual exam: https://www.validexam.com/NSE5_FMG-7.0-latest-dumps.html --------------------------------------------------- Images: https://premium.validexam.com/wp-content/plugins/watu/loading.gif https://premium.validexam.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-01-09 11:53:12 Post date GMT: 2024-01-09 11:53:12 Post modified date: 2024-01-09 11:53:12 Post modified date GMT: 2024-01-09 11:53:12