[Sep-2024] Check your preparation for F5 201 On-Demand Exam [Q55-Q78] : Valid Premium Exam : http://premium.validexam.com

NO.55 The 8IG-IP Administrator generates a qkview using “qkview -SO” and needs to transfer the output file via SCP.
Which directory contains the output file?

/var/log

/var/tmp

/var/local

/var/config

NO.56 Which two can be a part of a virtual server’s definition? (Choose two.)

rule(s)

pool(s)

monitor(s)

node address(es)

loadbalancing method(s)

NO.57 A site is load balancing to a pool of web servers. Which
statement
is true concerning BIGElIP’s ability to verify whether the web servers are functioning properly or not.

Web server monitors can test the content of any page on the server.

Web server monitors always verify the contents of the index.html page.

Web server monitors can test whether the server’s address is reachable, but cannot test a page’s content.

Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

NO.58 Refer to the exhibit.

A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.
Which actional configuration is regard to resolve this issue?

Configure SSL Profile (Client)

Configure Protocol Profile (Server)

Configure Service Profile HTTP

Configure SSL Profile (Server)

NO.59 The BIG-IP Administrator needs to ensure the correct health monitor is being used lor a new HTTP pool named P_example.
Where should the BIG-IP Administrator validate these settings in the Configuration Utility?

Local Traffic > Nodes > Default Monitor

Local Traffic > Profiles > Services > HTTP > http

Local Traffic > Monitors > http

Local Traffic > Pools > P_ example

NO.60 Which three methods can be used for initial access to a BIGElIP system. (Choose three.)

CLI access to the serial console port

SSH access to the management port

SSH access to any of the switch ports

HTTP access to the management port

HTTP access to any of the switch ports

HTTPS access to the management port

HTTPS access to any of the switch ports

NO.61 A standard virtual server has been associated with a pool with multiple members.
Assuming all other settings are left at their defaults, which statement is always true
concerning traffic processed by the virtual server.

The client IP address is unchanged between the cEl ls iedne t connection and the serverElside connection.

The server IP address is unchanged between the cEl lis end te connection and the serverElside connection.

The TCP ports used in the clienEl tside connection are the same as the TCP ports serverElside connection.

The IP addresses used in the clientElside connection are the same as the IP addresses used in the serverElside connection.

NO.62 Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the pool members?

No SSL certificates are required on the pool members.

The pool members.SSL certificates must only exist.

The pool members.SSL certificates must be issued from a certificate authority.

The pool members.SSL certificates must be created within the company hosting the BIGIPs.

NO.63 A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.

172.16.20.1:80

172.16.20.2:80

172.16.20.3:80

172.16.20.4:80

172.16.20.5:80

NO.64 Assuming there are open connections through an active system’s NAT and a fail over occurs, by default, what happens to those connections?

All open connections will be lost.

All open connections will be maintained.

The “Mirror” option must be chosen on the NAT and the setting synchronized prior to the connection establishment.

Longlived connections such as Telnet and FTP will be maintained while shortlived connections such as HTTP will be lost.

All open connections are lost, but new connections are initiated by the newly active BIG IP, resulting in minimal client downtime.

NO.65 Refer to the exhibit.

A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.
Which actional configuration is regard to resolve this issue?

Configure SSL Profile (Client)

Configure Protocol Profile (Server)

Configure Service Profile HTTP

Configure SSL Profile (Server)

NO.66 How is persistence configured.

Persistence is an option within each pool’s definition.

Persistence is a profile type; an appropriate profile is created and associated with virtual server.

Persistence is a global setting; once enabled, loElb adlancing choices are superceded by the persistence method that is specified.

Persistence is an option for each pool member. When a pool is defined, each member’s definition includes the option for persistence.

NO.67 A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

Round Robin

Dynamic Ratio

Ratio

Least Connection

NO.68 A BIG-IP Administrator is informed that traffic on Interface 1.1 is expected to increase over the maximum bandwidth capacity on the link. There is a single VLAN on the Interface. What should the 8IG-IP Administrator do to increase the total available bandwidth?

Assign two Interfaces to the VLAN

Set the media speed of Interface 1.1 manually

Create a trunk object with two Interfaces

Increase the MTU on the VLAN using Interface 1.1

NO.69 You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2?

All changes to TEST1 are propagated to TEST2.

Some of the changes to TEST1 may propagate to TEST2.

Changes to TEST1 cannot affect TEST2 once TEST2 is saved.

When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.

NO.70 Users are unable to reach an application. The BIG-IP Administrator checks the Configuration Utility and observes that the Virtual Server has a red diamond in front of the status. What is causing this issue?

All pool members are down.

The Virtual Server is receiving HTTPS traffic over HTTP virtual.

The Virtual Server is disabled.

All pool members have been disabled.

NO.71 A BIG-IP Administrator contacts F5 Support, which identifies a suspected hardware failure. Which information should the BIG-IP Administrator provide to F5 Support?

Qkview, EUD output

Qkview, UCS archive, core files

Qkview, part numbers for failed components

Qkview, packet capture, UCS archive

NO.72 Where is the loadbalancing mode specified?

within the pool definition

within the node definition

within the virtual server definition

within the pool member definition

NO.73 Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

Most templates, such as http and tcp, are as effective as customized monitors.

Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.

Most templates, such as https, should have the receive rule customized to make the monitor more robust.

While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.

NO.74 Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes.
What should the BIG-IP Administrator do to reduce the impact of future failovers?

Enable Failover Multicast Configuration

Set up Failover Method to HA Order

Configure MAC Masquerade

Configure a global SNAT Listener

NO.75 A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?

System > Configuration

Network > Interfaces

Network > Self IPs

System > Platform

NO.76 Assume a virtual
server
has a ServerSSL
profile.
What
SSL certificates are required on the pool members.

No SSL certificates are required on the pool members.

The pool members.SSL certificates must only exist.

The pool members.SSL certificates must be issued from a certificate authority.

The pool members.SSL certificates must be created within the company hosting the BIGElIPs.

NO.77 Where is connection mirroring configured.

It an option within a TCP profile.

It is an optional feature of each pool.

It is not configured; it is default behavior.

It is an optional feature of each virtual server.

NO.78 Where is persistence mirroring configured?

It is always enabled.

It is part of a pool definition.

It is part of a profile definition.

It is part of a virtual server definition.