[2025] CTS-D Dumps are Available for Instant Access [Q48-Q67] : Valid Premium Exam : http://premium.validexam.com

NO.48 Contrast ratio should be measured from __________ locations within the viewing area.
Response:

All

Two

Four

Five

NO.49 An AV integrator’s documentation that includes scope of work, definition of systems, and responsibilities should be defined in which of the following documents?
Response:

Commissioning punch list

Systems specification

Schematic design narrative

Project submittals

NO.50 Which is an important consideration for AV designers concerning a client’s existing wireless network?
Response:

QoS could be minimized.

Variable bandwidth dynamics issues.

Integration of POS equipment into the system.

Data security/encryption issues.

NO.51 When you’ve identified a security risk, you can avoid it, accept it, transfer it, or __________.
Response:

Mitigate it

Change it

Eliminate it

Reconfigure it

NO.52 Considering a 2400 watt lighting dimmer is available, the design load for the system should NOT exceed:
Response:

1300 watt

2400 watt

1920 watt

1750 watt

NO.53 To transport audio using AVB/TSN, you must have at least __________ Ethernet.
Response:

10 Mbps

10 Gbps

1 Gbps

100 Mbps

NO.54 In an AV project involving a courtroom, sightlines from the jury box are obscured by an architectural feature. How should the issue be addressed?
Response:

Consult with the end user on the best way to address the obscurity

Instruct the lead technician to request a construction change directive to address the problem

Generate a request for information

Move the required equipment to an unobscured location

NO.55 Which of the following is a type of control system?
Response:

Cloud-based

Computer-driven

Habitual learning

All of the above

NO.56 What formula is used to predict the transmission loss of single-layer, impermeable materials?
Response:

Mass law

Ohm’s law

Frequency coefficient

Inverse square law

NO.57 What systems should be included when drawing AV network diagrams?
Response:

The connected devices, cabling system, wireless links

Lighting and projection, noise synching, ambient noise reduction

Sprinkler system, ceiling plan, touch panel, plumbing runs

Signal control, audio auditing, laser conduit

NO.58 Which of the following is a mitigation strategy for addressing security risks introduced by AV systems?
Response:

Putting AV systems on a VLAN

Hiring a security expert

Building a firewall

Setting all passwords to “password”

NO.59 Calculating for loudspeaker coverage takes into account which of the following?
Response:

Dispersal patterns, room dimensions, and number of speakers

Ceiling height, listeners’ ear height, and the speaker’s angle of coverage

Number of listeners, type of audio, speaker power

Number of speakers, type of speakers, acoustic treatments

NO.60 If you have a projector that is 2500 ANSI lumens on a 5.5 m2 standard matte white screen, what should be the limits of the task lighting? Note that the projector specification is derated by 25 percent.
Response:

515 to 1001 lux

113.6 to 1022.7 lux

120 to 175 lux

527 to 632 lux

NO.61 According to the ANSI/INFOCOMM 3M-2011 standard, Projected Image System Contrast Ratio, what is the minimum contrast ratio of basic decision-making tasks?
Response:

15:1

80:1

7:1

50:1

NO.62 What factors MUST be considered when designing and drawing rack elevation diagrams?
Response:

User mobility, competence of the technician, quality of the rack material

Amount of RJ-45 connectors used, amount of conduit used

Equipment manufacturer, model year of equipment, number of USB ports

Ergonomics, weight distribution, RF and IR reception, heat loads, signal separation

NO.63 The main considerations when selecting a cable shield are:
Response:

Materials, permeability, and conductors

Coverage, flexibility, and frequency range

Cable types, gauge, and interference

Impedance, flexibility, and materials

NO.64 The first step when determining conduit capacity for cable should be to determine the:
Response:

Wire dimensions exclusive of insulation multiplied by 3.1459

Allowable fill percentage based upon local codes and regulations

Bend radius for all cables utilized in the installation

Cable resistance and multiply by a factor of 5

NO.65 What is the purpose of mapping in human-centered interface design?
Response:

Lay out the design for clear understanding

Signal what actions are possible and how they should be done

Communicate what the design can or cannot do

Communicate the results of an action

NO.66 Under what circumstances might you advise a client to implement a multi-point video conferencing control unit?
Response:

For international video conferencing

For video streaming a conference

For connecting 2 codecs from different manufacturers

For distance learning to 8 classrooms

NO.67 An image constraint token onscreen indicates a problem with __________.
Response:

HDMI

UHDTV

EDID

HDCP