Ultimate Guide to Prepare 300-710 Certification Exam for CCNP Security in 2025 [Q183-Q203]

admin 300-710 Cisco December 1, 2025

4.8/5 - (12 votes)

Ultimate Guide to Prepare 300-710 Certification Exam for CCNP Security in 2025

Use Real 300-710 Dumps – Cisco Correct Answers updated on 2025

To pass the Cisco 300-710 exam, candidates must demonstrate their understanding of the fundamental concepts of network security, such as access control, threat detection, and risk assessment. They must also possess in-depth knowledge of the Cisco Firepower NGFW and be able to configure and manage various security features, such as application control, URL filtering, and network analysis policies.

NO.183 Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.

NO.184 An engineer plans to reconfigure an existing Cisco FTD from transparent mode to routed mode. Which additional action must be taken to maintain communication Between me two network segments?

Configure a NAT rule so mat traffic between the segments is exempt from NAT.

Update the IP addressing so that each segment is a unique IP subnet.

Deploy inbound ACLs on each interface to allow traffic between the segments.

Assign a unique VLAN ID for the interface in each segment.

NO.185 What is the maximum SHA level of filtering that Threat Intelligence Director supports?

SHA-1024

SHA-4096

SHA-512

SHA-256

NO.186 What is the advantage of having Cisco Firepower devices send events to Cisco Threat response via the security services exchange portal directly as opposed to using syslog?

All types of Firepower devices are supported.

An on-premises proxy server does not need to set up and maintained

Supports all devices that are running supported versions of Firepower

Firepower devices do not need to be connected to the internet.

NO.187 An engineer must configure an ERSPAN passive interface on a Cisco Secure IPS by using the Cisco Secure Firewall Management Center. These configurations have been performed already:
* Configure the passive interface.
* Configure the ERSPAN IP address.
Which two additional settings must be configured to complete the configuration? (Choose two.)

Source IP

Bypass Mode

TCP Intercept

Flow ID

Destination MAC

NO.188 An engineer must configure a Cisco FMC dashboard in a child domain.
Which action must be taken so that the dashboard is visible to the parent domain?

Adjust policy inheritance settings

Add a separate widget

Create a copy of the dashboard

Add a separate tab

NO.189 A security engineer sees an alert on Cisco Secure Endpoint console showing a malicious verdict for a file with the SHA-256 hash
0488537078abcdef048853abcdef048853abcdef048853abcdef048853abcdef048853. Which step will mitigate this threat?

Add the hash to network block list.

Quarantine the file on endpoint.

Add the hash to custom detection list.

Enable firewall on infected endpoint.

NO.190 Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD?
(Choose two.)

OSPFv2 with IPv6 capabilities

virtual links

SHA authentication to OSPF packets

area boundary router type 1 LSA filtering

MD5 authentication to OSPF packets

NO.191 An engineer is configuring a Cisco Secure Firewall Threat Defense device and warns to create a new intrusion rule based on the detection of a specific pattern in the data payload for a new zero-day exploit. Which keyword type must be used to add a Line that identifies the author of the rule and the date it was created?

metadata

content

reference

gtp_info

NO.192 An engineer is troubleshooting application failures through an FTD deployment. While using the FMC CLI, it has been determined that the traffic in question is not matching the desired policy. What should be done to correct this?

Use the system support firewall-engine-debug command to determine which rules the traffic matching and modify the rule accordingly.

Use the system support firewall-engine-dump-user-identity-data command to change the policy and allow the application though the firewall.

Use the system support application-identification-debug command to determine which rules the traffic matching and modify the rule accordingly.

Use the system support network-options command to fine tune the policy.

NO.193 Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?

Windows domain controller

audit

triage

protection

NO.194 A network administrator is deploying a new Cisco Secure Firewall Threat Defense (FTD) firewall.
After Cisco Secure FTD is deployed, inside clients have intermittent connectivity to each other.
When reviewing the packet capture on the Secure FTD firewall, the administrator sees that Secure FTD is responding to all the ARP requests on the inside network. Which action must the network administrator take to resolve the issue?

Review the access policy and verify that ARP is allowed from inside to inside.

Review NAT policy and disable incorrect proxy ARP configuration.

Convert the FTD to transparent mode to allow ARP requests.

Hardcode the MAC address of the FTD to IP mapping on client machines.

NO.195 An engineer is configuring URL filtering tor a Cisco Secure Firewall Threat Defense device in Cisco Secure Firewall Management Centre. Use’s must receive a warning when they access
..wwww badaduitsito com with the option of continuing to the website if they choose to No other websites should he blocked. Which two actions must the engineer take to moot these requirements?

Configure
an access control rule that matches an URL object for http://www.Dadadullsile.com
‘ and set the action to Interactive Block.

On the HTTP Responses tab of the access control policy editor, set the Interactive Block Response Page to System-provided.

Configure the default action for the access control policy to Interactive Block.

On the HTTP Responses tab of the access control policy editor set the Block Response Page to Custom.

Configure an access control rule that matches the Adult URL category and sot the action to Interactive Block

NO.196 Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?

configure coredump packet-engine enable

capture-traffic

capture

capture WORD

NO.197 An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?

Maximum Detection

Security Over Connectivity

Balanced Security and Connectivity

Connectivity Over Security
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html

NO.198 Which object type supports object overrides?

time range

security group tag

network object

DNS server group

NO.199

Refer to the exhibit. Users attempt to connect to numerous external resources on various TCP ports. If the users mistype the port, their connection closes immediately, and it takes more than one minute before the connection is torn down. An engineer manages to capture both types of connections as shown in the exhibit.
What must the engineer configure to lower the timeout values for the second group of connections and resolve the user issues?

outbound access rule that allows the entire ICMP protocol suite

inbound access rule that allows ICMP Type 3 from outside

inbound access rule that allows TCP reset packets from outside

outbound access rule with the Block with reset action

NO.200 A company has many Cisco FTD devices managed by a Cisco FMC. The security model requires that access control rule logs be collected for analysis. The security engineer is concerned that the Cisco FMC will not be able to process the volume of logging that will be generated. Which configuration addresses this concern?

Send Cisco FTD connection events and security events directly to SIEM system for storage and analysis.

Send Cisco FTD connection events and security events to a cluster of Cisco FMC devices for storage and analysis.

Send Cisco FTD connection events and security events to Cisco FMC and configure it to forward logs to SIEM for storage and analysis.

Send Cisco FTD connection events directly to a SIEM system and forward security events from Cisco FMC to the SIEM system for storage and analysis.

NO.201 Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

system generate-troubleshoot

show configuration session

show managers

show running-config | include manager

NO.202 A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?

Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.

Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.

Deploy multiple Cisco FTD HA pairs to increase performance

Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance

NO.203 An engineer wants to add an additional Cisco FTD Version 6.2.3 device to their current 6.2.3 deployment to create a high availability pair.
The currently deployed Cisco FTD device is using local management and identical hardware including the available port density to enable the failover and stateful links required in a proper high availability deployment. Which action ensures that the environment is ready to pair the new Cisco FTD with the old one?

Change from Cisco FDM management to Cisco FMC management on both devices and register them to FMC.

Ensure that the two devices are assigned IP addresses from the 169 254.0.0/16 range for failover interfaces.

Factory reset the current Cisco FTD so that it can synchronize configurations with the new Cisco FTD device.

Ensure that the configured DNS servers match on the two devices for name resolution.

Cisco 300-710 exam consists of 60-70 questions and takes approximately 90 minutes to complete. 300-710 exam is available in English and Japanese and can be taken at any Pearson VUE testing center around the world.

CCNP Security -300-710 Exam-Practice-Dumps: https://www.validexam.com/300-710-latest-dumps.html