[Jan-2026] Check your preparation for Fortinet NSE5_FMG-6.2 On-Demand Exam [Q47-Q69]

admin NSE5_FMG-6.2 Fortinet January 26, 2026

Rate this post

[Jan-2026] Check your preparation for Fortinet NSE5_FMG-6.2 On-Demand Exam

Practice Exam NSE5_FMG-6.2 Realistic Dumps Verified Questions

Fortinet NSE5_FMG-6.2 exam is designed to test the proficiency of IT professionals in managing Fortinet security devices using FortiManager 6.2. NSE5_FMG-6.2 exam covers a wide range of topics, including the installation and configuration of FortiManager, device registration and management, policy management, security profile management, and reporting. IT professionals who pass NSE5_FMG-6.2 exam demonstrate their expertise in using FortiManager 6.2 to manage Fortinet security devices in a complex network environment.

Q47. View the following exhibit. An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package.
When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

10.0.1.0/24

It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values

192.168.0.1/24

Local-FortiGate will automatically choose an IP Network based on its network interface settings.

Q48. View the following exhibit. Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

Q49. What does a policy package status of Modified indicate?

FortiManager is unable to determine the policy package status

The policy package was never imported after a device was registered on FortiManager

Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager

Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

Q50. Refer to the exhibit. Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

Policy seq.# 3 will not be installed on any managed device.

Policy seq.# 3 will be installed on the Trainer[NAT] VDOM only.

Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets.

The Install On column value represents successful installations on the managed devices.

Q51. An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.

FortiManager will not allow the administrator to delete a referenced address object.

FortiManager will replace the deleted address object with the all address object in the referenced firewall policy.

FortiManager will disable the status of the referenced firewall policy.

Q52. Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does not match with the device-level database.

Configuration changes directly made on FortiGate have been automatically updated to the device-level database.

The latest revision history for the managed FortiGate does match with the FortiGate running configuration.

Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.

Q53. Which of the following statements are true regarding VPN Manager? (Choose three.)

VPN Manager must be enabled on a per ADOM basis.

VPN Manager automatically adds newly-registered devices to a VPN community.

VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.

Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.

VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.

Q54. View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

FortiManager updated the object ALL using FortiGate’s value in its database

FortiManager updated the object ALL using FortiManager’s value in its database

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager installed the object ALL with the updated value.

Q55. When configuring FortiGuard on FortiManger. Which two statements are correct regarding Allow Push Update settings configured in the FortiGuard. Antivirus and IPS Settings? (Choose two)

If an urgent or critical FortiGuard Antivirus and/or IPS update becomes available, the FortiManger bult-in FDS will send push update notifications to each managed device.

If an urgent or critical FortiGuard Antivirus and/or IPS update becomes available, the FortiManger bult-in FDS will send push update notifications.

FortiManager’s built-in FDS service may not correctly receive push updates if the external facing IP address of any intermediary NAT device is dynamic.

FortiManager’s built-in FDS service does not allow an administrator to override the default FortiManger IP address and port used by the FDN to send update messages.

Q56. Which of the following items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

Q57. When statement correct compares FortiManager physical and virtual appliances?

Physical and virtual FortiManager appliances may manage unlimited devices and have unrestricted storage.

Physical and virtual FortiManager appliances use licenses to increase managed device and storage capacity limits.

Physical and virtual FortiManager appliances have an unrestricted daily logging rate.

Physical and virtual FortiManager appliances use model types and licenses respectively, to differentiate managed device and storage capacity limits.

Q58. Refer to the exhibit.

What can you conclude from the failed installation log shown in the exhibit?

Policy ID 2 will not be installed.

Policy ID 2 is installed without a source device.

Policy ID 2 is installed without a source address.

Policy ID 2 is installed in the disabled state.

Q59. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

Q60. What does the diagnose dvm check-integrity command do? (Choose two.)

Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOMsyntax

Verifies and corrects unregistered, registered, and deleted device states

Verifies and corrects database schemas in all object tables

Verifies and corrects duplicate VDOM entries

Q61. Which ports are commonly used by FortiManager? (Choose two.)

TCP 541 for remote management of a FortiGate unit.

TCP 5199 HA heartbeat or synchronization (FortiManager HA cluster).

TCP 703 HA heartbeat or synchronization (FortiManager HA cluster).

TCP 514 for remote management of a FortiGate unit.

Q62. Refer to the exhibit.

An administrator is importing a new device to FortiManager and has selected the options shown in the exhibit.
What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted.

The unused objects that are not tied to the firewall policies in the policy package will be deleted from the FortiManager database.

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate.

The unused objects that are not tied to the firewall policies will be installed on FortiGate.

Q63. Which statements are true about Offline mode on the FortiManager? (Choose two)

Enabled by default.

Devices cannot be managed when Offline mode is enabled.

Enabling Offline mode enables fgfm protocol (TCP 541).

Offline mode is enabled by default when backup is restored on FortiManager.

Q64. In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices.
The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

The FortiGate will be added automatically to the default ADOM named FortiGate.

The FortiGate will be automatically added to the Training ADOM.

By default, the unregistered FortiGate will appear in the root ADOM.

The FortiManager administrator must add the unregistered device manually to the unregistered device manually to the Training ADOM using the Add Device wizard

Q65. Refer to the exhibit. If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

Q66. An administrator run the reload failure command: diagnose test deploymanager reload config <deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

Q67. As a result of enabling FortiAnalyzer features on FortiManager, which of the following statements is true?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

Q68. Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

Q69. An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

Fortinet NSE5_FMG-6.2 certification exam covers a wide range of topics, including FortiManager installation, configuration, and management, FortiGuard services, device registration, policy and object management, and user authentication. NSE5_FMG-6.2 exam also focuses on managing and monitoring multiple Fortinet devices, network topologies, and virtual domains. Candidates will be tested on their ability to perform advanced tasks such as customizing device templates, managing firmware updates, and creating custom reports.

Valid NSE5_FMG-6.2 Dumps for Helping Passing Fortinet Exam: https://www.validexam.com/NSE5_FMG-6.2-latest-dumps.html