Get Real BIM_MGT_101 Quesions Pass Autodesk Certification Exams Easily [Q24-Q41]

admin BIM_MGT_101 Autodesk August 31, 2026

Rate this post

Get Real BIM_MGT_101 Quesions Pass Autodesk Certification Exams Easily

BIM_MGT_101 Dumps are Available for Instant Access

Autodesk BIM_MGT_101 Exam Syllabus Topics:

Section	Weight	Objectives
Project needs assessment	28%	– Initialize project setup 1. Implement project-specific BIM processes 2. Participate in project kickoff meetings 3. Assemble interdependent models 4. Establish project datums – Analyze project requirements 1. Assess team capability and training requirements 2. Strategize ecosystem of tools for project execution 3. Determine client BIM requirements – Develop and implement project-specific BIM Execution Plan (BEP) 1. Establish level of development (LOD) or Level of Information Need 2. Establish BIM goals and uses 3. Establish information delivery plans 4. Establish delivery team risk management systems 5. Distribute BIM Execution Plan – Implement quality control procedures 1. Analyze project models for performance and model health 2. Check model information completeness and compliance
Collaboration process	36%	– Manage Common Data Environment (CDE) process 1. Share BIM data files and models with third parties 2. Implement issue tracking 3. Manage data security – Coordinate and maintain geolocation 1. Reconcile geolocation issues 2. Implement building location changes using shared coordinates 3. Extend coordinates across multidisciplinary project models – Review consultant and subcontractor BIM deliverables 1. Evaluate received geometry and content 2. Validate QA standards and LOD requirements 3. Mandate standards compliance – Manage 3D coordination 1. Allocate resolution responsibilities 2. Manage clash detection processes 3. Set up clash detection reports and analytics – Manage 3D models 1. Map phases of linked models 2. Assemble multi-building and multidisciplinary models 3. Implement stakeholder shared parameters
Corporate standards and documentation	16%	– Document best practices at the corporate level 1. Perform post-project evaluations 2. Define QA/QC processes for milestone reviews 3. Review BIM standards – Create project and content templates 1. Create multidisciplinary model templates 2. Customize content creation templates 3. Support graphic standards via authoring tools 4. Create project templates – Evaluate digital tools that improve consistency and efficiency of deliverables 1. Evaluate and build a business case 2. Establish a standard process for evaluating tools – Establish BIM standards to align with organizational requirements 1. Create model health thresholds 2. Research, interpret, and apply industry data standards – Develop training and learning paths 1. Create training and provide career pathway resources 2. Evaluate staff competencies against requirements – Develop BIM Execution Plan (BEP) templates 1. Define mobilization plan templates 2. Establish risk management system templates 3. Establish information delivery plan templates 4. Define project team roles and responsibilities
Data management	20%	– Manage model creation according to project standards 1. Control output visibility 2. Ensure naming and numbering compliance – Conduct project closeout 1. Archive project data 2. Facilitate data handover – Audit and resolve model issues 1. Troubleshoot project files 2. Educate teams on model issues 3. Review internal models for compliance and health 4. Validate compliance with project and industry standards

NO.24 A museum project anticipating generative iterations is being designed by a team working across multiple time zones under a tight schedule. The client hosts weekly meetings to review various facade options, document sustainability goals, and evaluate numerous energy analyses.
What project-specific training should the design technology team provide to prepare the team for client meetings and ensure successful project execution?

AutoCAD, Autodesk Forma, generative design.

Generative design, AutoCAD, Civil 3D.

Forma Site Design, generative design, Autodesk Forma.

Sustainability certification, Revit, Forma Site Design.

NO.25 During early coordination on a hospital project, the BIM manager runs a general clash detection between all models and generates over 3,000 clash results. Many are low-priority issues, such as wall-grid overlaps and minor duct-ceiling intersections. The project’s clash matrix outlines only high-impact clashes between structural, MEP, and architecture in specific zones.
For the BIM manager, what is the most appropriate next step to align clash reporting with the project’s coordination strategy?

Share the full clash report with all project teams and instruct them to determine and resolve the issues they consider most important.

Export the entire clash list into spreadsheet format so project managers can manually sort, review, and prioritize the items by trade.

Disable or relax selected non-critical clash rules within the detection software to temporarily reduce the total number of reported issues.

Apply the clash matrix to filter out low-priority clashes, adjust detection tolerances where appropriate, and produce reports for each discipline’s scope.

NO.26 A firm-wide Revit template has an advanced setup of views preset on sheets. A renovation project has a linked as-built model with levels that do not align with levels from the model template.
What method should a BIM manager use to update the levels and create grids in sync with the resource model, without requiring extensive reworking of the preset sheets?

Align model levels to the linked levels and use Copy/Monitor to duplicate the linked grids.

Create a Scope Box around the linked model and assign it to the template levels and grids.

Delete the template’s levels and use Copy/Monitor to duplicate the linked levels and grids.

Customize a View Template to hide the template levels and only show the linked levels.

NO.27 A BIM manager is preparing to onboard a group of subcontractors into Autodesk Forma for a large healthcare project. These subcontractors need access to a limited set of model files related only to interior partitions, but should not be able to view or modify structural, MEP, or scheduling content.
What two actions should the BIM manager take to manage data security in this scenario? (Select two.)

Hide coordination issues from the subcontractors to limit liability.

Assign role-based permissions and folder-level access aligned with the subcontractors’ scope.

Create and share a Package with specific set-up content.

Provide access to the entire model set but watermark any non-applicable content.

Assign full project access and ask team leads to verbally explain access limitations.

NO.28 A design team is distributing models to a construction team’s coordinator, who reports that the various models are not aligned to each other when linked into the coordination environment.
What step should the design team’s lead BIM manager take to resolve the positioning issue?

Reset coordinates and advise the coordinator to link all models by Internal Origin to Internal Origin.

Publish coordinates from the Main Model out to all linked consumed consultant files.

Report coordinates to provide the coordinator with the desired positioning of each model for them to reposition.

Advise consultants to acquire coordinates from the primary design team’s model and resubmit updated models.

NO.29 A government facility project requires unique data formatting and export requirements that comply with a global data-management initiative. A workflow utilizing a newly released add-on tool is developed to perform this task.
How should a BIM manager define training and ensure the appropriate staff receive it?

Create training tutorials for the unique tasks and assign them to the members whose roles are responsible for the tasks.

Develop a full training curriculum and assign all members of the project team, regardless of role.

Assign the task to the team and provide training to any user whose Journal reveals a crash.

Review each project model at milestone deliveries and assign the team training on items that fail the quality-control review.

NO.30 The BIM manager is coordinating a multi-building project in which each building must maintain a unique internal coordinate system but share a common origin point for site-wide references.
Which two actions are required to correctly manage the coordinate setup in this scenario? (Select two.)

Place the Survey Point at the shared site origin for all buildings.

Create unique Survey and Project Base Points for all buildings, maintaining individual Building Coordination.

Place the Project Base Point at the shared site origin for all buildings.

Share coordinates by acquiring from the master site model, using a single Survey and Project Base Point.

Assign a unique Project Base Point for each building model.

NO.31 A BIM manager is running clash detection for the first time on a large retail project during the Design Development phase. After copying all the models to the coordination space on Autodesk Forma, the matrix shows no clashes among any of the models.
How should the BIM manager proceed?

Add sheets to the publish settings and rerun the clash.

Verify the shared coordinates for each model and republish.

Continue forward on the project because there are no coordination issues.

Use the project as a case study for a firm-wide presentation.

NO.32 A BIM manager is reviewing a consultant’s architectural model before the next coordination milestone. The project requires each model to conform to a defined naming convention, include COBie parameters, and populate shared parameters according to the Model Element Table. The BIM manager notices that several elements are missing metadata and that some naming is inconsistent.
Which step best supports a systematic evaluation of completeness and compliance with project standards?

Manually review each element in the Model Browser to confirm naming and parameter completeness.

Use a model checker or data-validation tool to compare parameter presence, naming conventions, and required values against the established project standard.

Ask the design team to re-export the model with updated information based on verbal clarification and metadata from the BIM Execution Plan.

Filter out incomplete elements in a 3D view and hide them to avoid confusion during coordination.

NO.33 Refer to the exhibit.

A client has provided the design team with a title block family and a Shared Parameters file that must be used as part of their standards. Those provided parameters must be applied both in the Project Information area as well as the title block.
When the design team is in the project model and attempts to fill in information into the title block parameters, a question mark appears. What is the likely cause of this?

The shared parameters were included in the title block family but were not loaded into the project file.

The parameters were not included in the Shared Parameters file provided by the client.

The Shared Parameters file was not added to the title block family and was using text instead of a label.

The Sheet and Project Information fields were overwritten in the title block.

NO.34 A BIM manager is preparing to share a federated model package with an external cost estimator. The estimator only needs access to quantities and location-based metadata, but not design intent or proprietary elements from other teams.
What is the first step the BIM manager should take to ensure appropriate use and minimize data-related risk?

Export the models as PDFs to prevent the third party from modifying geometry.

Confirm that the model content, format, and permissions match the recipient’s defined scope of use.

Verify that the file sizes are small enough for email transmission.

Convert the models into 2D views to avoid exposing embedded metadata.

NO.35 A federated model has been created for a multidisciplinary project, but clashes are being reported in areas where coordination should already be resolved. Upon investigation, the BIM manager finds that some models were exported with outdated links and local coordinates.
What is the most appropriate next step before proceeding with coordination analysis?

Notify the client and exclude the faulty models from further coordination.

Run an additional clash-detection pass with adjusted tolerance thresholds to reduce clash totals.

Freeze the current model state and ask trades to work around the identified issues.

Instruct teams to verify model references and coordinate systems before reassembly.

NO.36 A project manager who is not familiar with Autodesk Forma has asked a BIM manager to lead clash detection for their Revit project. The project manager would like to review the issue lists weekly, by discipline, to track progress and coordinate with consultants as needed.
What should the BIM manager do to fulfil this request efficiently?

Export the Autodesk Forma issues to an Excel file manually every week and email it to the project manager.

Schedule weekly reports with appropriate filters in Autodesk Forma that are saved to the project files.

Run the Interfere command in AutoCAD and email the Autodesk Forma issues every week.

Use an Excel file to track issues instead of Autodesk Forma to accommodate the project manager.

NO.37 During a model health check, a BIM manager notices that an international airport project’s models are 1 GB each. The team has not mentioned any issues, but they did miss a recent 50% Construction Documents deadline.
What should the BIM manager do?

Create a separate model for sheets and ask the team to audit and compact the models every day.

Proceed to check another project’s model health since the team has not mentioned any issues.

Coordinate with the project team to purge the model, remove unused views, and address warnings.

Assign multiple BIM managers to the project and take one week to clear every warning.

NO.38 A multidisciplinary healthcare project has multiple firms contributing to a federated model. Early coordination reviews reveal data inconsistencies, unauthorized edits, and missed communication between design teams.
What is the most appropriate first step to establish effective coordination and risk mitigation across the delivery team?

Assign responsibility for each firm to review and maintain its own models, document identified issues, and present findings during scheduled coordination meetings.

Implement tighter access controls within the Common Data Environment by defining permissions, monitoring edits, and restricting changes to authorized team members.

Develop and communicate protocols that clarify model ownership, editing rights, quality-control procedures, and expected communication channels.

Require each discipline to submit a detailed modelling strategy, document its assumptions, and use this information to identify and resolve potential design conflicts.

NO.39 A designer needs to add Area Lines in an Area Plan, but upon adding them, they receive a message stating that none of the created elements are visible.

Where can they check to resolve the issue?

Plan Region

Detail Level

Area Scheme

Visibility/Graphics

NO.40 A project team has been ignoring their model warnings, and from talking with the team, it is apparent that they are intimidated by the number of warnings and unwilling to tackle resolving them.
What steps can the BIM manager take to educate the team and alleviate their reluctance to address these issues?

Show the team how warnings are sorted by type and advise them on how to research and resolve them.

Advise the team to export the warnings list, then bulk delete the elements creating the warnings.

Install a third-party add-in that allows the team to mark all warnings with “ignore.”

Create Autodesk Forma issues for each warning and assign them to specific team members.

NO.41 A contractor has requested the Architectural Revit model for a design-bid-build project to help with their fabrication drawings. The contractor understands and agrees that construction documents will govern in case of discrepancies.
How should the BIM Manager proceed?

Add the contractor to the Autodesk Forma project for model access given their understanding.

Copy the model file and send it as soon as possible.

Verify that the contractor has signed a digital content release form before sending the model.

Export the sheets to DWG format and send those files.