100% Pass Guaranteed Free HPE7-V01 Exam Dumps Sep 25, 2026 [Q30-Q52]

admin HPE7-V01 HP September 25, 2026

Rate this post

100% Pass Guaranteed Free HPE7-V01 Exam Dumps Sep 25, 2026

Verified & Latest HPE7-V01 Dump Q&As with Correct Answers

HP HPE7-V01 Exam Syllabus Topics:

Section	Objectives
Topic 1: Solution Lifecycle and Operations	– Customer outcome validation and proposal alignment – Deployment planning and implementation approach – Performance, scalability, and optimization
Topic 2: Solution Design and Architecture	– Customer requirement gathering and analysis – Designing multi-site and complex enterprise solutions – Workload-based architecture (cloud, AI, enterprise apps)
Topic 3: HPE Edge-to-Cloud Architecture and Value Proposition	– HPE portfolio positioning (GreenLake, compute, storage, networking, services) – Industry trends and hybrid cloud models
Topic 4: HPE Technologies and Platforms	– Networking and hybrid connectivity solutions – HPE GreenLake consumption model – Compute platforms (ProLiant, Apollo, Cray) – Storage and data protection solutions

NEW QUESTION 30
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
* 30 compute nodes to support their virtualization workloads
* Redundancy within the management subsystem
* An in-frame storage solution to support vSAN
* A guidance/automation technology with HPE Aruba to virtualize WWNs
* Simplified management with a single logical enclosure
You are reviewing the following proposal:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE D3940 Storage Modules with maximum number of drives
* 6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
* 30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards Which statement about the proposal is true to help meet the customer requirements?

Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.

HPE 32Gb Fibre Channel switches should be added to the proposal to enable WWN virtualization and profile mobility.

Each frame should be equipped with two HPE 12Gb SAS switches to provide connectivity between compute nodes and D3940 Storage Module.

3 x HPE Composer 2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.

NEW QUESTION 31
Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use in a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Alletra 6000 your customer will be able to configure an Active Peer Persistence wizard with a one- to-many topology.

With HPE Alletra Storage MP B10000 your customer will be able to use Peer Persistence to protect workloads running on VMware.

With HPE Alletra Storage MP B10000 your customer will be able to configure an Active Peer Persistence wizard with a one-to-many topology.

With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware.

NEW QUESTION 32
Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

Management of Pensando cards in the servers.

VLAN visibility of VMware on non-HPE servers.

NEW QUESTION 33
Which statement about designing HPE SimpliVity solutions for high availability is true?

If a stretched cluster is configured, an arbiter should be deployed in both sites.

Standard HA clusters require a vSphere Foundation subscription at minimum.

At least four availability zones should be configured between sites.

If a stretched cluster is configured, an arbiter should be deployed at a third site.

NEW QUESTION 34
Your customer has HPE Superdome Flex running VMware ESXi 8.x. Current setup consists of:
* One Rack Management Controller
* One HPE Superdome Flex Base chassis
* One HPE Superdome Flex Expansion chassis
The existing complex has a single nPartition. The customer plans to expand the existing nPartition with two additional expansion chassis.
Which statement about the planned expansion is true?

If the existing nPartition is managed using HPE OneView, it must be removed before an expansion.

Customer has to replace one of the expansion chassis with base chassis, to provide I/O redundancy.

In order to add two additional chassis, customer has to power off the existing nPartition.

Existing nPartition must be placed in the maintenance mode using Rack Management Controller CLI.

NEW QUESTION 35
Your customer has requested a solution with HPE Alletra Storage MP B10000 that needs four SFP28 ports per node, for iSCSI connectivity.

A junior architect has prepared a BOM for the solution.
What needs to be changed in the BOM to meet the requirement?

Remove the 52564A HBAs and add Q2P64B XCVRs to the BOM.

Add two 52564A HBAs to the BOM.

Add four Q2P64B XCVRs to the BOM.

Replace the 52564A HBAs with R7C82A HBAs in the BOM.

NEW QUESTION 36
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
* 30 compute nodes to support their virtualization workloads
* Redundancy within the management subsystem
* An in-frame storage solution to support vSAN
* A redundant networking subsystem with the ability to virtualize WWNs
* Simplified management with a single logical enclosure
You are reviewing the following proposal:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE D3940 Storage Modules with maximum number of drives
* 6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
* 30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards Which statement about this proposal is true to help meet the customer requirements?

Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.

30 x HPE OneView Advanced licenses should be removed from the proposal.

HPE 32Gb switches should be added to the proposal to enable WWNs virtualization and profile mobility.

3 x HPE Composer2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.

NEW QUESTION 37
Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-premises utilities.
How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?

By deploying the Data Services Connector VM and importing the cluster to DSCC.

By introducing the cluster as a PCBE setup integrated with DSCC.

By replacing the iLO using the HPE Compute Ops Management activation process.

By configuring the OmniStack integration with HPE InfoSight.

NEW QUESTION 38
You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 8 HPE Synergy 25/50Gb Interconnect Link Modules
* 60 HPE Synergy 480 Gen11
Which statement about the business and financial benefit of the new solution for the customer is true?

HPE Synergy 480 Gen11 compute modules have an extension that will allow the customer to install 4 GPUs in half-height format compute nodes.

HPE Virtual Connect SE 100Gb F32 Module for Synergy can support FC traffic once an upgrade license for each module is added in HPE OneView.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules, which provides better flexibility and expansion possibilities.

NEW QUESTION 39
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant DL360 Gen11 deployed with ESXi 8.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra Storage MP B10000.
Which statement about the configuration and customer requirements is true?

HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server only support the HPE Synergy platform managed using HPE Composer2.

Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.

Using HPE Storage Integration Pack for VMware vCenter Server for VVol creation is only supported if the ESXi systems have vSphere Enterprise Plus subscriptions.

HPE OneView for VMware vCenter Server supports the Proactive HA feature, which will define the response in case of host health degradation to improve workload availability.

NEW QUESTION 40
You are planning a data center networking solution for your customer.
The plan includes:
* A VXLAN/EVPN solution
* Aruba CX8325H as TOR switches
* Aruba CX8320 as core switches
How should you configure the ports from the TOR switches to the core switches?

The ports should be configured as standalone routed ports to each core switch.

The ports should be configured as LAG member layer 2 ports to both core switches.

The ports should be configured as standalone layer 2 ports to each core switch.

The ports should be configured as LAG member routed ports to both core switches.

NEW QUESTION 41
You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
* Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
* Each node should have access to shared storage from HPE Alletra Storage MP B10000
* All virtual machines should be protected against host failure
* All virtual machines with vGPU must be protected with Fault Tolerance
* All compute nodes should boot from drives located in the D3940 Storage Modules protected with RAID 1
* All frames should be managed as one logical enclosure to simplify management
* All compute nodes should support two network ports with the maximum Ethernet connectivity speed You are reviewing a proposal that you must verify. The proposal contains:
* 3 HPE Synergy 12000 frames
* 2 HPE Synergy Composer2 modules
* 4 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 HPE Synergy 50Gb Interconnect Link Modules
* 3 HPE Synergy D3940 Storage Modules, each with 20 SSD drives
* 1152 core vSphere Enterprise Plus subscriptions
* 36 HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
* A single Platinum CPU with 32 cores
* HPE Synergy 6820C 25/50Gb Converged Network Adapter
* HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
* HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)

2 HPE Synergy 50Gb Interconnect Link Modules should be removed from the proposal, as the total number of interconnects required is six.

HPE MR416i-o Smart RAID controller can be removed because there are no external SAS disk enclosures included in the proposal.

Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy can be removed from the proposal because all requirements are met without them.

To access HPE Alletra MP B10000 arrays, FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Modules for Synergy must be purchased.

vSphere Enterprise Plus subscriptions can be replaced with vSphere Standard subscriptions.

NEW QUESTION 42
A customer requested a quote for a 64Gb Fibre Channel system between two data centers with a distance of
95 KM / 60 MI between the locations, with a requirement for 14 F-ports on each switch.
Refer to exhibit

Which statement is true about the given configuration?

A Short Wave transceiver must be removed to install the Long Wave transceiver.

A Fibre Channel license needs to be modified for Extended Fabric to support the required distance.

A SFP56 or SFP56-DD port can be used for the Long Wave transceiver when all SFPs are inserted.

A port range of 39 to 47 can be used for the LW transceiver if ports 0 to 23 are used for SW.

NEW QUESTION 43
Your customer has provided the CLI output of a switch to show how their devices are connected.
Refer to the output:
show arp
IPv4 Address MAC Port Physical Port State
10.0.255.2 … vlan150 … reachable
10.12.43.1 … vlan1 … reachable
10.0.255.3 … vlan150 … reachable
Total Number Of ARP Entries Listed: 3.
What should you consider while discussing upgrades to your customer’s environment and network components?

The support for VSF stacking functionality.

The support for Overlay networks is required.

The support for IGMP snooping is mandatory.

The support for Virtual Switching Extension is required.

NEW QUESTION 44
Your customer requires a data protection solution that will support their workloads running on an HPE Alletra MP B10000 storage array.
Your customer requirements include:
* Protecting VMware vSphere workloads
* Covering different hypervisors
* Pay-per-use model
* Near synchronous and block-level replication
Select the most appropriate solution.

HPE Zerto

HPE Data Ops Manager

HPE Alletra Storage Server 4120

HPE StoreOnce 3660

NEW QUESTION 45
Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage. They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure.
The frames will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide lossless traffic for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?

Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Server Profiles should include redundant connections to a RoCE network.

Create DCB queues using server’s operating system utility.

Assign two different priority values to RoCE traffic.

NEW QUESTION 46
One of your customers is planning to refresh their current campus wired and wireless networking equipment.
They are currently moving to a pay-per-use model for their whole IT solution.
They are wondering if there is a possibility to get new networking equipment in this model without capital expenses. They are also interested in moving LAN management to an external service provider. You are presenting HPE GreenLake for Aruba Networking.
Which statement is true for this customer situation?

Aruba networks can be managed by Aruba experts with 24/7 hardware monitoring.

HPE GreenLake for Aruba Networking only offers Aruba software licenses in a subscription-based format.

HPE GreenLake for Aruba Networking is the central monitoring cloud software for Aruba equipment only.

HPE GreenLake for Aruba Networking offers HPE experts support for third-party wireless devices.

NEW QUESTION 47
Your customer wants to implement an HPE SimpliVity stretched cluster spanning two sites to improve availability.
You are reviewing an HPE SimpliVity proposal that consists of the following components:
* 12 HPE SimpliVity 380 Gen11 nodes, 8 for the primary site and 4 for the remote site, all of which have
2 CPUs, 16 cores each
* 12 HPE OneView Advanced licenses
* 2 HPE Alletra Storage MP B10000, 1 for the primary site and 1 for the remote site
* 384 core VMware vSphere Standard subscriptions
* Two pairs of ArubaOS-CX 8325 switches
Which statement about this proposal is true?

Additional VMware subscriptions should be added, as the HPE SimpliVity 380 Gen11 core count is higher than needed.

In order to enable DRS functionality, vSphere Standard subscriptions should be replaced with vSphere Foundation subscriptions.

A Remote Copy license should be activated on all HPE Alletra arrays to enable remote HPE SimpliVity backups.

Aruba OS-CX 8325 should be enhanced with a Pensando license so HPE SimpliVity traffic can be secured.

NEW QUESTION 48
Your customer’s environment includes HPE Private Cloud Business Edition with deployed HPE SimpliVity
380 Gen11 nodes.
They have asked you to upgrade the vSphere, OmniStack, and firmware components of the environment in a fully controlled operation.
Which tool should you use?

HPE GreenLake / DSCC / PCBE site upgrade

HPE SimpliVity Upgrade Manager application

HPE OCA/HPC plugin and vCenter Update Manager

HPE OVC/HPC plugin and vCenter Update Manager

NEW QUESTION 49
Your customer has a requirement to support 500K IOP/s write speeds in their environment.

What change should you make to the configuration to achieve this?

Replace the nodes with B91160 model and add additional drive shelf and more drives.

Replace the nodes with B91130 model and add additional drive shelf.

Increase the amount of drives supported to achieve the requirement.

Replace the nodes with B10230 model and add additional drive shelf and more drives.

NEW QUESTION 50
Your customer is considering HPE Nimble or HPE Primera for use as a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Nimble, your customer will be able to access the protected volume via the target storage array.

With Nimble, your customer will be able to combine an Active Peer Persistence variant with a 1-1 topology.

With Nimble, your customer will be able to deploy Witness/Quorum via OVA image.

With Primera, your customer will be able to deploy Quorum Witness via OVA image.