Best NSE7_FSN_AR-7.6 Exam Dumps for the Preparation of Latest Exam Questions [Q44-Q67]

admin NSE7_FSN_AR-7.6 Fortinet November 12, 2026

Rate this post

Best NSE7_FSN_AR-7.6 Exam Dumps for the Preparation of Latest Exam Questions

NSE7_FSN_AR-7.6 Actual Questions 100% Same Braindumps with Actual Exam!

Fortinet NSE7_FSN_AR-7.6 Exam Syllabus Topics:

Section	Objectives
Topic 1: SD-WAN	– Application steering – Deployment and troubleshooting – Overlay VPN – Performance SLA – SD-WAN routing – SD-WAN architecture
Topic 2: Enterprise Firewall	– Security Fabric integration – Authentication and identity – High availability – Advanced firewall deployment – Routing and advanced networking – Centralized management and analytics – Troubleshooting – VPN technologies

QUESTION 44
Exhibit.

Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)

There are 98908 kB of memory that will never be used.

The user space has 708880 kB of physical memory that is not used by the system.

The I/O cache, which has 641364 kB of memory allocated to it.

The value indicated next to the inactive heading represents the currently unused cache page.

QUESTION 45
Refer to the exhibit, which shows a partial output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

The user was found in the LDAP tree, whose root is TAC.ottawa.fortinet.com.

FortiOS performs a bind to the LDAP server using the user ‘ s credentials.

FortiOS collects the user group information.

FortiOS is performing the second step (Search Request) in the LDAP authentication process.

QUESTION 46
Refer to the exhibits.

An OSPF peer is advertising route 172.16.52.0/24. The local FortiGate is configured with an inbound distribution list that allows the 172.16.0.0/16 network to be injected into its routing table. However, the 1 ‘
2.16.52.0/24 subnet cannot be seen in the FIB.
Which two stops can the administrator of the local FortiGate take to ensure that the advertised 172.16. 52.0/24 subnet will be injected into the routing table? (Choose two.)

Add another entry to the prefix list to specifically allow the 172.16.52.0/24 network.

Change the ge value to 17.

Change the R- value lo 16.

Modify the default prefix-list behavior from implicit deny to implicit allow.

QUESTION 47
While troubleshooting a FortiGate web filter issue, users report that they cannot access any websites, even though those sites are not explicitly blocked by any web filter profiles that are applied to firewall policies.

What are the three most likely reasons for this behavior? (Choose three answers)

The web filter cache has been cleared causing all websites to take longer to be rated.

The SSL/TLS deep inspection was configured but the browsers do not have the FortiGate certificate installed.

The webfilter-force-off setting has been enabled under config system fortiguard.

The DNS server is unreachable, preventing URL resolution.

The FortiGuard Web Filtering license has expired, causing FortiGate to apply the default block action.

QUESTION 48
Refer to the exhibits, which contain the partial configurations of two VPNs on FortiGate.

An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovers that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must the administrator make to fix the issue? (Choose two.)

Change to aggressive mode on both VPNs.

Enable XAuth on both VPNs.

Use different pre-shared keys on both VPNs.

Set up specific peer IDs on both VPNs.

QUESTION 49
Which statement about IKEv2 is true?

Both IKEv1 and IKEv2 share the feature of asymmetric authentication.

IKEv1 and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.

IKEv1 and IKEv2 use the same TCP port but run on different UDP ports.

IKEv1 and IKEv2 share the concept of phase1 and phase2.

QUESTION 50
Exhibit.

Refer to the exhibit, which shows two entries that were generated in the FSSO collector agent logs.
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee What three conclusions can you draw from these log entries? {Choose three.)

Remote registry is not running on the workstation.

The user ‘ s status shows as ” not verified ” in the collector agent.

DNS resolution is unable to resolve the workstation name.

The FortiGate firmware version is not compatible with that of the collector agent.

A firewall is blocking traffic to port 139 and 445.

QUESTION 51
Refer to the exhibit, which shows one way communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.

What three actions must you take to ensure successful communication? (Choose three.)

You must authorize the downstream FortiGate on the root FortiGate.

FortiGate must not be in NAT mode.

Ensure TCP port 8013 is not blocked along the way.

You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.

Ensure the port for Neighbor Discovery has been changed.

QUESTION 52
Exhibit.

Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)

There are 98908 kB of memory that will never be used.

The user space has 708880 kB of physical memory that is not used by the system.

The I/O cache, which has 641364 kB of memory allocated to it.

The value indicated next to the inactive heading represents the currently unused cache page.

QUESTION 53
Refer to the exhibit, which shows the output of diagnose sys session stat.

Which statement about the output shown in the exhibit is correct?

All the sessions in the session table are TCP sessions.

162 sessions have been deleted because of memory page exhaustion.

There are 166 TCP sessions waiting to complete the three-way handshake.

There are two sessions that have not been removed in case any out-of-order packets arrive.

QUESTION 54
Exhibit.

Refer to the exhibit, which shows a partial web fillet profile configuration.
Which action does FortiGate lake if a user attempts to access www. dropbox. com, which is categorized as File Sharing and Storage?

FortiGate allows the connection, based on the URL Filter configuration.

FortiGate blocks the connection as an invalid URL.

FortiGate exempts the connection, based on the Web Content Filter configuration.

FortiGate blocks the connection, based on the FortiGuard category based filter configuration.

QUESTION 55
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.

What two conclusions can you draw from the output? (Choose two.)

The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.

The logon event can be seen on the collector agent installed on Windows.

FSSO is using DC agent mode to detect logon events.

FSSO is using agentless polling mode to detect logon events.

QUESTION 56
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.

What two conclusions can you draw from the output? (Choose two.)

The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.

The logon event can be seen on the collector agent installed on Windows.

FSSO is using DC agent mode to detect logon events.

FSSO is using agentless polling mode to detect logon events.

QUESTION 57
Refer to the exhibit.

The output from using the command diagnose debug application samld -1 to diagnose a SAML connection is shown. Based on this output, which two conclusions can you draw? (Choose two answers)

The IdP IP address is 10.1.10.254.

The SP IP address is 10.1.10.254.

The SP IP address is 10.1.10.2.

The IdP IP address is 10.1.10.2.

QUESTION 58
Refer to the exhibit.

An auto-discovery VPN (ADVPN) network is shown.
You must configure an ADVPN using iBGP for each local region and eBGP across regions to connect Overlay 1 with Overlay 2.
Which two options must you configure in the Hub2Hub BGP peering? (Choose two.)

set next-hop-self enable

set attribute-unchanged next-hop

set ebgp-enforce-multihop enable

set ebgp-enforce-multihop advpn

The Use Case 2 – BGP Configuration diagram explicitly shows these commands for inter-region BGP neighbors:
set attribute-unchanged next-hop
set ebgp-enforce-multihop enable
Technical Explanation:
The topology contains two independent BGP autonomous systems:
* Region A operates within AS 65100.
* Region B operates within AS 65200.
Within each region, iBGP exchanges routing information between the hub and its associated spokes. Between the two regions, eBGP propagates routes through the Hub2Hub connection.
Option B is correct: The command set attribute-unchanged next-hop preserves the BGP next-hop attribute when routes are advertised between the regional hubs.
Preserving next-hop information is important in the documented inter-region ADVPN design because it supports the intended routing and shortcut behavior across the overlays. The next-hop addresses must remain reachable through the configured routing infrastructure.
Option C is correct: The command set ebgp-enforce-multihop enable allows eBGP neighbor relationships to operate when the peers are not directly adjacent at the IP routing level.
In this topology, the hubs establish BGP peering using their inter-hub addresses. Enabling eBGP multihop supports the required connectivity when reaching those addresses involves intermediate routed hops.
Why the other options are incorrect:
Option A: set next-hop-self enable causes FortiGate to replace the advertised next hop with its own address.
This contradicts the next-hop preservation requirement shown in the study guide ‘ s configuration for this topology.
Option D: set ebgp-enforce-multihop advpn is not the documented FortiOS configuration syntax. The valid value used here is enable.
Architectural Consideration:
For a multiregion ADVPN design, the architect must ensure that BGP next-hop resolution, inter-hub routing, and IPsec connectivity are consistent. Otherwise, BGP may establish successfully while data-plane forwarding or shortcut creation still fails.
References: Enterprise Firewall 7.6 Administrator Study Guide, Auto-Discovery VPN – Use Case 2, pages
235-237; SD-WAN 7.6 Enterprise Administrator Study Guide, Dual-Hub and Multiregion Topologies, page
152.

QUESTION 59
Refer to the exhibit.

The port1 interface configuration on FortiGate and partial session information for ICMP traffic are shown.
Which two things happen to the session information if a routing change occurs that affects this session?
(Choose two answers)

This session will be unaffected by routing changes. The routing changes will apply only to new sessions.

The session will be flagged as dirty but no route lookups will be performed.

The session information will not change unless the current route has been removed from the routing table.

The session information will not change even when the active route has been removed from the routing table.

QUESTION 60
In which two slates is a given session categorized as ephemeral? (Choose two.)

A UDP session with only one packet received

A UOP session with packets sent and received

A TCP session waiting for the SYN ACK

A TCP session waiting for FIN ACK

QUESTION 61
Refer to the exhibits.

FGT-1 is an area border router (ABR) that has interfaces in OSPF areas 0.0.0.0 and 0.0.0.5. FGT-3 acts as an autonomous system border router (ASBR), importing static routes into OSPF. FGT-2 is an internal router with all its interfaces belonging to area 0.0.0.5. FGT-1 is receiving all advertised routes from FGT-2, however, FGT-3 is not receiving any of the advertised routes from FGT-1. What is the most likely reason for this?
(Choose one answer)

Area 0.0.0.5 is configured not to propagate type 5 LSAs.

FGT-2 is configured with a distribution list to block all advertised routes from FGT-3.

FGT-3 and FGT-2 have not formed an OSPF adjacency yet.

IP protocol 89 is blocked between FGT-1 and FGT-3.

QUESTION 62
Refer to the exhibit.

The exhibit shows the output of a session. Which two statements are correct? (Choose two.)

The session did not match a firewall policy.

The gateway to the destination is 10.1.10.1.

The session was initiated from an authenticated user.

The TCP session has been successfully established.

QUESTION 63
Refer to the exhibit.
The exhibit shows the output from using the command diagnose debug application samld -1 to diagnose a SAML connection.

Based on this output, what can you conclude?

Active Directory is used for authentication.

The authentication request is for an SSL VPN connection.

The IdP IP address is 10.1.10.254.

The IdP IP address is 10.1.10.2.

QUESTION 64
Refer to the exhibit, which shows a session entry.

Which statement about this session is true?

Return traffic to the initiator is sent to 10.1.0.1.

Return traffic to the initiator is sent lo 10.200.1.254.

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It is an ICMP session from 10.1.10.1 to 10.200.5.1.

QUESTION 65
Refer to the exhibit.

Partial output of command diagnose debug rating is shown. Which FDS server will the FortiGate algorithm choose?

96.45.33.65

208.91.112.194

64.26.151.37

209.22.147.36

QUESTION 66
Refer to the exhibits.

How does FortiGate handle traffic with the source IP address 10.0.1.125 and the destination IP address
128.66.0.125?